Difference between revisions of "4.3 DaySim"

Revision as of 21:33, 17 October 2016

TAZ level household, employment and school enrollment are allocated to parcels using the allocation tool. The location of allocation is \User.prg\DaySim_Inputs\1_Parcel\AllocationTool\AllocationTool.exe. It must be noted again that this tool was built after NERPM-AB model development and hence, allocation for the model was done manually.

The allocation tool requires following four inputs:

TAZ file
Block file
TAZ-Block intersect file
School file

TAZ File

The TAZ file used as input to the parcel allocation tool contains TAZ-level information control totals of employment by industrial sector, households and enrollment school type, which are disaggregated down to the parcel level.

TABLE 4-4 PARCEL ALLOCATION TOOL TAZ INPUT FILE

FIELD	DESCRIPTION
TAZ	taz number
XCOORD	X coordinate of taz centroid – state plane feet
YCOORD	Y coordinate of taz centroid – state plane feet
AREA	taz area – square feet
HH10	households in taz
EMP_{by_Industry}	{industry} employment in taz

Block File

The block file used as input to the parcel distribution tool contains key information describing employment by sector and households, which are used to inform the disaggregation of the TAZ-level controls. There are two primary sources for this block–level information: Household information the US Census Bureau’s American Community Survey, while information on employment by industrial sector is derived from US Census Bureau’s Local Employment Dynamics database. Table 4‑5 summarizes the contents of the block file.

TABLE 4-5 PARCEL ALLOCATION TOOL BLOCK INPUT FILE

FIELD	DESCRIPTION
blockid10	Block id number
xcoord	X coordinate of block centroid – state plane feet
ycoord	Y coordinate of block centroid – state plane feet
SQFT	block area – square feet
IFE002	households in block
CNS01	Number of jobs in NAICS sector 11 (agriculture, forestry, fishing, and hunting)
CNS02	Number of jobs in NAICS sector 21 (mining, quarrying, and oil and gas extraction)
CNS03	Number of jobs in NAICS sector 22 (utilities)
CNS04	Number of jobs in NAICS sector 23 (construction)
CNS05	Number of jobs in NAICS sector 31-33 (manufacturing)
CNS06	Number of jobs in NAICS sector 42 (wholesale trade)
CNS07	Number of jobs in NAICS sector 44-45 (retail trade)
CNS08	Number of jobs in NAICS sector 48-49 (transportation and warehousing)
CNS09	Number of jobs in NAICS sector 51 (information)
CNS10	Number of jobs in NAICS sector 52 (finance and insurance)
CNS11	Number of jobs in NAICS sector 53 (real estate and rental and leasing)
CNS12	Number of jobs in NAICS sector 54 (professional, scientific, and technical services)
CNS13	Number of jobs in NAICS sector 55 (management of companies and enterprise)
CNS14	Number of jobs in NAICS sector 56 (administrative and support and waste management and remediation services)
CNS15	Number of jobs in NAICS sector 61 (educational services)
CNS16	Number of jobs in NAICS sector 62 (health care and social assistance)
CNS17	Number of jobs in NAICS sector 71 (arts, entertainment, and recreation)
CNS18	Number of jobs in NAICS sector 72 (accommodation and food services)
CNS19	Number of jobs in NAICS sector 81 (other services, except public administration)
CNS20	Number of jobs in NAICS sector 92 (public administration)
C000	Total number of jobs in block

TAZ-Block Intersect File

The TAZ-block intersect file is the source for the parcel geography. This file is created by intersecting the Census block geography with the TAZ geography

TABLE 4-6 PARCEL ALLOCATION TOOL TAZ-BLOCK INTERSECT INPUT FILE

FIELD	DESCRIPTION
ID	parcel/microzone id number
XCOORD	X coordinate of intersect centroid – state plane feet
YCOORD	Y coordinate of intersect centroid – state plane feet
AREA	intersect area – square feet
TAZID	TAZ in which intersect is located
BLOCKID	Block in which intersect is located

School File

School location-level information on enrollment is necessary to order to ensure that the proper number of students are being attracted to each school location. Unlike employment and households, for which we must rely on block-level and TAZ-level information in order to derive parcel-level totals for these attributes, the allocation tool uses school specific information to associate enrollment with parcels. The data must include information on enrollment by grade for all schools in the region. It is recommended that the school locations be geocoded and visually inspected using land use information and aerial photos to ensure that schools are being placed in their correct locations. DaySim distinguishes school enrollment into three enrollment sectors:

Grade school enrollment (K-8)
High school enrollment (9-12)
University enrollment (post-secondary)

Future year school enrollment assumptions may be adjusted either by scaling the enrollment at the existing school locations consistently or by identifying new parcels as locations for schools. In either case, the amount of the scaled or additional enrollment should be consistent with the expected change in population by age, which can be derived from the trip-based model inputs. The file contents are provided in Table 4‑7.

TABLE 4-7 PARCEL ALLOCATION TOOL SCHOOL INPUT FILE

FIELD	DESCRIPTION
SCHID	School ID
MZID	Parcel/Microzone id
XCOORD	X coordinate of school – state plane feet
YCOORD	Y coordinate of school – state plane feet
STUGRD	grade school enrollment in taz
STUHGH	high school enrollment in taz
STUUNI	university enrollment in taz

Short Distance Impedance Generation

This process is required to generate more accurate short distances based on an all streets network. DTALite, a dynamic traffic assignment software, is used to generate node-to-node shortest path distances using the all streets network. The executable is called “DTALite_64.exe” (in \User.prg\DaySim_Inputs\1_Parcel\Buffering\) and requires the following input files:

Node file
Link file
Link type file
Node pairs file

Node File

This file provides DTALite with the locations of all the nodes in the all streets network and has the following format. It has to be named “input_node.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory.

TABLE 4-8 DTALITE INPUT NODE FILE FORMAT

FIELD	DESCRIPTION
NODEID	Node id number
XCOORD	X coordinate of node– state plane feet
YCOORD	Y coordinate of node – state plane feet

Link File

This file provides DTALite with information about link attributes and the nodes they connect and has the following format. It has to be named “input_link.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. Only the first four fields are used in calculations. The remaining fields can use dummy values if that information is not readily available.

TABLE 4-9 DTALITE INPUT LINK FILE FORMAT

FIELD	DESCRIPTION	REQUIRED
FROM_NODE_ID	A node of the link	Yes
TO_NODE_ID	B node of the link	Yes
LINK_ID	Link id number	Yes
LENGTH_IN_MILE	Link length in miles	Yes
DIRECTION	Direction of the link	No
NAME	Name of the link	No
SPEED_LIMIT_IN_MPH	Speed limit	No
NUMBER_OF_LANES	Number of lanes	No
LINK_TYPE	Type of link	No
LANE_CAPACITY_IN_VHC_PER_HOUR	Lane capacity	No

Link Type File

This file provides DTALite with link type definitions and has the following format. It has to be named “input_link_type.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. However, the default provided with the model setup can be used instead of creating a new file each time. This is because the input in this file is not taken into consideration for just getting shortest path distances over the network.

TABLE 4-10 DTALITE INPUT LINK TYPE FILE FORMAT

FIELD	DESCRIPTION
LINK_TYPE	Link type code
LINK_TYPE_NAME	Link type name
FREEEWAY_FLAG	1 if freeway; 0 otherwise
RAMP_FLAG	1 if ramp; 0 otherwise
ARTERIAL_FLAG	1 if arterial; 0 otherwise

Node Pairs File

This file provides DTALite with the specific node pairs for which network shortest path distance needs to calculated. As noted earlier, it is usually all nodes that are with 3-miles (Euclidean) of each other. It has to be named “input_od_pairs.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. The node pairs file needs to be in the following format.

TABLE 4-11 DTALITE INPUT NODE PAIRS FILE FORMAT

FIELD	DESCRIPTION
RECORD_ID	Record id number
ORIGIN_NODE_ID	Origin node id
DEST_NODE_ID	Destination node id

There exists a utility “Network_DataPrepv2.exe” (also in \User.prg\DaySim_Inputs\1_Parcel\Buffering\) folder of the master model directory) that uses the node file (input_node.csv) and produces the node pairs file. The Euclidean distance threshold between the node pairs can be controlled by changing BUFRAD parameter in “netprep.ctl” file.

Node-to-Node Distance File

When run, DTALite outputs a comma-separated text file named “output_shortest_path.txt”. This contains the shortest path distance information for all the network node pairs provided as input. The format of the file is as follows.

TABLE 4-12 DTALITE OUTPUT NODE DISTANCE FILE FORMAT

FIELD	DESCRIPTION
RECORD_ID	Record id number
FROM_NODE_ID	Origin node id
TO_NODE_ID	Destination node id
DISTANCE	Shortest path distance in miles

DaySim Buffering Tool

The Daysim buffering tool is run to prepare parcel input file for DaySim. The executable is called “DSBuffTool.exe” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\” folder of the master model directory. The tool is run to prepare parcel input file for DaySim.

Buffered Parcel File

This is a space-delimited delimited ASCII text format file (.dat) with one row of data per parcel and is the primary file used to maintain socioeconomic information. The file begins with several fields that identify the parcel, and describe the physical location and size of the parcel, and then contains fields that describe the quantity of housing, school enrollment, and employment around the parcel using logistic distance decay curves with 1/8th mile and quarter mile inflection points. These two distance decay curves with 1/8^th and quarter mile inflection points result in “buffer 1” and “buffer 2” variables respectively which are referred to in the file format table below.. In addition, the parcel file contains information about urban form and the transportation system on and close to the parcel, including the proximity to transit stops and the price and supply of parking.

TABLE 4-13 BUFFERED PARCEL FILE

FIELD	DESCRIPTION
id	Parcel/Microzone ID number
xcoord_p	X coordinate – state plane feet
ycoord_p	Y coordinate – state plane feet
sqft_p	Area – square feet
taz_p	TAZ number
lutype_p	land use type
hh_p	households on parcel
stugrd_p	grade school enrollment on parcel
stuhgh_p	high school enrollment on parcel
stuuni_p	university enrollment on parcel
empedu_p	educational employment on parcel
empfoo_p	food employment on parcel
empgov_p	government employment on parcel
empind_p	industrial employment on parcel
empmed_p	medical employment on parcel
empofc_p	office employment on parcel
empret_p	retail employment on parcel
empsvc_p	service employment on parcel
empoth_p	other employment on parcel
emptot_p	total employment on parcel
parkdy_p	offstreet daily parking on parcel
parkhr_p	offstreet hourly parking on parcel
ppricdyp	offstreet daily parking price
pprichrp	offstreet hourly parking price
hh_1	households within buffer 1
stugrd_1	grade school enrollment within buffer 1
stuhgh_1	high school enrollment within buffer 1
stuuni_1	university enrollment within buffer 1
empedu_1	educational employment within buffer 1
empfoo_1	food employment within buffer 1
empgov_1	government employment within buffer 1
empind_1	industrial employment within buffer 1
empmed_1	medical employment within buffer 1
empofc_1	office employment within buffer 1
empret_1	retail employment within buffer 1
empsvc_1	service employment within buffer 1
empoth_1	other employment within buffer 1
emptot_1	total employment within buffer 1
parkdy_1	offstreet daily parking within buffer 1
parkhr_1	offstreet hourly parking within buffer 1
ppricdy1	average offstreet daily parking price within buffer 1
pprichr1	average offstreet hourly parking price within buffer 1
nodes1_1	number of single link street nodes (dead ends) within buffer 1
nodes3_1	number of three-link street nodes (T-intersections) within buffer 1
nodes4_1	number of 4+ link street nodes (traditional 4-way +) within buffer 1
tstops_1	number of transit stops within buffer 1
nparks_1	number of open space parks within buffer 1
aparks_1	open space area in square feet within buffer 1
hh_2	households within buffer 2
stugrd_2	grade school enrollment within buffer 2
stuhgh_2	high school enrollment within buffer 2
stuuni_2	university enrollment within buffer 2
empedu_2	educational employment within buffer 2
empfoo_2	food employment within buffer 2
empgov_2	government employment within buffer 2
empind_2	industrial employment within buffer 2
empmed_2	medical employment within buffer 2
empofc_2	office employment within buffer 2
empret_2	retail employment within buffer 2
empsvc_2	service employment within buffer 2
empoth_2	other employment within buffer 2
emptot_2	total employment within buffer 2
parkdy_2	offstreet daily parking within buffer 2
parkhr_2	offstreet hourly parking within buffer 2
ppricdy2	average offstreet daily parking price within buffer 2
pprichr2	average offstreet hourly parking price within buffer 2
nodes1_2	number of single link street nodes (dead ends) within buffer 2
nodes3_2	number of three-link street nodes (T-intersections) within buffer 2
nodes4_2	number of 4+ link street nodes (traditional 4-way +) within buffer 2
tstops_2	number of transit stops within buffer 2
nparks_2	number of open space parks within buffer 2
aparks_2	open space area in square feet within buffer 2
dist_lbus	distance to nearest local bus stop from parcel
dist_ebus	distance to nearest express bus stop from parcel
dist_crt	distance to nearest commuter rail stop from parcel
dist_fry	distance to nearest ferry stop from parcel
dist_lrt	distance to nearest light rail stop from parcel
dist_park	distance to nearest park from parcel

The following are the input files required for buffering process.

Base Parcel File

This file contains information regarding location and land-use of parcels. The buffer variable calculations pivot off of this base file. This is an output generated from the distribution tool described earlier and has the following format.

TABLE 4-14 BASE PARCEL/MICROZONE FILE FORMAT

FIELD	DESCRIPTION
parcelid	Parcel/Microzone ID number
xcoord_p	X coordinate – state plane feet
ycoord_p	Y coordinate – state plane feet
sqft_p	parcel area – square feet
taz_p	corresponding TAZ number
block_p	corresponding census block number
hh_p	households on parcel
stugrd_p	grade school enrollment on parcel
stuhgh_p	high school enrollment on parcel
stuuni_p	university enrollment on parcel
empedu_p	educational employment on parcel
empfoo_p	food employment on parcel
empgov_p	government employment on parcel
empind_p	industrial employment on parcel
empmed_p	medical employment on parcel
empofc_p	office employment on parcel
empret_p	retail employment on parcel
empsvc_p	service employment on parcel
empoth_p	other employment on parcel
emptot_p	total employment on parcel
parkdy_p	offstreet daily parking on parcel
parkhr_p	offstreet hourly parking on parcel
ppricdyp	offstreet daily parking price
pprichrp	offstreet hourly parking price

Offstreet parking location and pricing information is used in the activity-based models system to influence mode and other choices. Note that this parking information is focused on publically accessibility off-street locations and does not consider private off-street parking locations (such as those available only to workers in an office building), nor does it consider on-street parking location. Future year parking locations and costs can be easily added to the model system by simply updating the parcel base file to identify parking capacity and costs for individual parcels. Where data is unavailable or unknown, the parking attributes should be set to 0.

Intersection Data File

A unique measure of urban form that DaySim incorporates is the number of intersections or nodes of different types around a parcel. These intersection types include, dead-ends (1 link), T-intersections (3-links), and tradition intersections (4+ links), and help characterize the pattern of urban development. The intersection data currently used is in a text file and has the following format.

TABLE 4-15 INTERSECTION DAT FILE FORMAT

FIELD	DESCRIPTION
id	Intersection ID number
links	Number of links associated with node
xcoord_p	X coordinate – state plane feet
ycoord_p	Y coordinate – state plane feet

A largely automated process has been developed to calculate these urban form measures based on detailed GIS street centerline files. This is more detailed than the modeled network, which does not include all streets. This GIS process analyses the GIS street centerline file to locate nodes and assigns an intersection type code to them based on the number of links joined to the node.

Transit Stops File

In addition to using zone-level information on access times to transit, DaySim also incorporates detailed parcel -level information on the distance to transit by transit sub-mode. The following table summarizes the contents of this file.

TABLE 4-16 TRANSIT STOPS FILE FORMAT

FIELD	DESCRIPTION
id	Transit stop ID number
mode	Transit submode code 1=local bus 2=express bus 3=commuter rail 4=ferry 5=light rail
xcoord_p	X coordinate – state plane feet
ycoord_p	Y coordinate – state plane feet

When developing or updating forecast year or project alternative networks, careful consideration should be given to the location of individual bus stops. In addition to the bus tops located in urban areas of the county, it is also necessary to incorporate bus stop locations for rural transit routes into the model. This fine-grained information is used by DaySim to develop parcel -level estimates of access time to transit. Ideally, forecast year transit networks would include a similar level of detail. Forecast year travel model transit network do include information on stop locations as part of the network coding. However, these stop locations are constrained by the coarser travel model roadway networks, and thus may tend to make transit access times appear longer by not including stops that are on major roads included in the roadway network. Model users should ensure that the future year transit stop location file used as input to the parcel preparation contains information consistent with expected future year alignments and stop spacing assumptions.

Parks/Open Spaces Data Stops File

A unique feature of DaySim is that it incorporates measures of access to publically accessible open space. Although open space is clearly an attractor of travel for recreational, social and other purposes, typically open space is not included in travel models because the traditional “size” measures used as input to travel models, such as employment and population, are not good indicators of the attractiveness of open space (i.e. a popular park will often have no employment and no population). The open space measures incorporated into DaySim capture the proximity of each parcel to the nearest open space, and the amount of open space present in the buffer area around the parcel. The following table describes the format of the file.

TABLE 4-17 OPEN SPACE DATA FILE FORMAT

FIELD	DESCRIPTION
id	Open space ID number
xcoord_p	X coordinate – state plane feet
ycoord_p	Y coordinate – state plane feet
sqft	Open space grid cell size in sq ft

The individual records in the open space file are based on converting a shapefile of regional, publically accessibility open spaces into a smaller set of open space grid cells.

If all streets network based short trip distances need to be used, the buffering program requires two additional input files that are described in the previous section on short distance impedance generation:

Node file (input_node.csv)
Node-to-node distance file (output_shortest_path.txt)

DaySim Inputs

Parcels

The final parcel data input file is a tab-delimited ASCII text format file created by the project team. This file has the main land use inputs, including parcel-specific values, and buffered measures. DaySim can read these variables in any order, but the variable names must remain the same as those in Table 4‑13. Currently, this file is \Master\{SCENARIO_DIR}\ Input\DaySimInput\02_Parcel\ Jacksonville_parcel_decayandCirc.dat.

Synthetic Population

Tools used to convert PopGen outputs to DaySim format can be found in \User.prg\DaySim_Inputs\2_PopGen. The household file, an input to DaySim, contains household-level variable and is Master\{SCENARIO_DIR}\ Input\DaySimInput\03_Household\_jax_hrec.dat.

TABLE 4-18 SYNTHETIC POPULATION HOUSEHOLD FILE

FIELD	DESCRIPTION
HHNO	Household id
HHSIZE	Household size
HHVEHS	Vehicles available
HHWKRS	Household workers
HHFTW	HH full time workers (type 1)
HHPTW	HH part time workers (type 2)
HHRET	HH retired adults (type 3)
HHOAD	HH other adults (type 4)
HHUNI	HH college students (type 5)
HHHSC	HH high school students (type 6)
HH515	HH kids age 5-15 (type 7)
HHCU5	HH kids age 0-4 (type 8)
HHINCOME	Household income ($)
HOWNRENT	Household own or rent
HRESTYPE	Household residence type
HHPARCEL	Residence parcel id
HHTAZ	Residence TAZ index number
HHEXPFAC	HH expansion factor
SAMPTYPE	Sample type (permanent, seasonal, groupquarter)

The person file, an input to DaySim, contains person-level variables and is Master\{SCENARIO_DIR}\ Input\DaySimInput\04_Person\_jax_prec.dat.

TABLE 4-19 SYNTHETIC POPULATION PERSON FILE

FIELD	DESCRIPTION
HHNO	Household id
PNO	person sequential id number on file
PPTYP	person type
PAGEY	age in years
PGEND	gender
PWTYP	worker type
PWPCL	usual work parcel id
PWTAZ	usual work TAZ
PWAUTIME	auto time to usual work
PWAUDIST	auto distance to usual work
PSTYP	student type
PSPCL	usual school parcel id
PSTAZ	usual school TAZ
PSAUTIME	auto time to usual work
PSAUDIST	auto distance to usual work
PUWMODE	usual mode to work
PUWARRP	Usual arrival period to work
PUWDEPP	Usual depart period from work
PTPASS	0/1 - 1 indicates an transit pass
PPAIDPRK	0/1 - 1 indicates paid parking available at workplace
PDIARY	0/1 - 1 indicates Person used paper diary
PPROXY	0/1 - 1 indicates an proxy response
PSEXPFAC	Person expansion factor

Worker IXXI Fraction

The IXXI fractions file has the fraction of workers in each zone who work outside the region, and the fraction of jobs filled by workers from outside the region. This file is an ASCII space-delimited file. Its location is Master\{SCENARIO_DIR}\ Input\DaySimInput\05_ixxi\ _jax_worker_ixxifractions.dat.

TABLE 4-20 WORKER IXXI FRACTION FILE

FIELD	DESCRIPTION
ZoneID	The TAZ number
Worker_IXFrac	The fraction of workers living in the zone who work outside the region
Jobs_XIFrac	The fraction of jobs in the zone filled by workers from outside the region

TAZ Indexes

The TAZ index file assigns a continuous numbering to the zones. External zones are also identifies in the file. The file is in ASCII space-delimited file with header. Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 01_TAZ_Index\ _jax_taz_indexes.dat.

TABLE 4-21 TAZ INDEX FILE

FIELD	DESCRIPTION
ZoneID	The TAZ number
Zone_ordinal	A zone index number, generally starting at 1, with no gaps
Dest_eligible	0/1 - 1 indicates an internal zone that is eligible as a destination in Daysim
External	0/1 - 1 indicates an external zone, not eligible as a destination in Daysim

PNR Nodes

The PNR node file contains PNR location ids and corresponding capacity and parking cost. The file is ASCII space-delimited. Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 05_pnr\ jax_p_rNodes.dat.

TABLE 4-22 PNR NODE FILE

FIELD	DESCRIPTION
NodeID	The park and ride node ID (can be the same as the ZoneID)
ZoneID	The TAZ number
XCoord	The X coordinate (in length units) of the park and ride node
YCoord	The Y coordinate (in length units) of the park and ride node
Capacity	The total capacity, in spaces, of the park and ride lot
Cost	The daily parking cost, in hundredths of monetary units, of the park and ride lot
PNR	PNR flag (1/99)
KNR	KNR flag (1/99)

Coefficients

Coefficient for each model is a separate text file (.F12 format) that can be edited by the user for calibration purpose. There are a total of 23 files corresponding to all the models. All coefficient files are in the same directory at \User.prg\DaySim\07_Coefficients. For example, the person day pattern model coefficient is a file named IndividualPersonDayPatternCoefficients_Jacksonville-v.5.F12 at that directory.

FIGURE 4-1 COEFFICIENT FILE EXAMPLE

Roster

Skim files report the level of services on regional network. All skim files are in text (*.TXT) format. The roster file is a CSV file that lists all the impedance skim files to be read and used by Daysim. Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 06_Roster\roster_jax.csv.

TABLE 4-23 ROSTER FILE

FIELD	DESCRIPTION
#variable	Skim variable, with string that is used in the C# code
mode	Skim mode, valid values are walk, bike, SOV, HOV2, HOV3, and transit
path-type	Path type, valid values are full-network, bus, knr-bus, pnr-bus
vot-group	Value of time range, valid values are very-low, low, medium, high, and very-high (currently all values are medium)
start-minute	First minute for which skim applies, in minutes past midnight
end-minute	Last minute for which skim applies, in minutes past midnight (if lower than start-minute, then period spans midnight
length	Size of matrix (currently all values are maxzone)
File-type	Type of input file, current valid values are Text_IJ, BIN and null (leave as 0)
name	File name (assumes same directory as roster file). Null is assumed for file type null
field	The field on the file (use 1 for BIN, for Text-IJ, the O and D zones are fields 1 and 2)
transpose	If TRUE, DaySim will use the transpose of the matrix that is read in
blend-variable	Variable that is used for short distance "blending" - the same mode is assumed
blend-path-type	Allows blending variable to be for a different path type, If null, same path type is assumed
factor	A factor to be applied to the matrix - e.g. 20 to turn walk distance to time. (If null, factor is 1)
scaling	If TRUE, matrix is scaled by 100 before being stored as a 2-byte integer. (BIN matrices are assumed to already be scaled)

Roster Combination

The "Roster Combinations" file gives the possible mode/path type combinations used in DaySim. It is a CSV file at \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 06_Roster\roster.combinations_Jax.csv. The file has columns that enumerate the 9 modes used in the current model system (walk, bike, SOV, HOV2, HOV3, transit, park-and-ride, school-bus, other) and 8 rows that enumerate the path types currently used. The cells are TRUE for valid combinations within DaySim and FALSE otherwise.

TABLE 4-24 ROSTER COMBINATION FILE EXAMPLE

#	WALK	BIKE	SOV	HOV2	HOV3	TRANSIT	PNR
full-network	TRUE	TRUE	TRUE	TRUE	TRUE	TRUE	TRUE
no-tolls	FALSE	FALSE	TRUE	TRUE	TRUE	FALSE	FALSE
bus	FALSE	FALSE	FALSE	FALSE	FALSE	TRUE	FALSE
project	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE
pnr-bus	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE	TRUE
pnr-project	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE
knr-bus	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE	TRUE
knr-project	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE	FALSE

Configuration

The configuration file is the main user input control file for DaySim. This file is an XML format. When running DaySim, the name of the configuration file and the name of the print log file can be given as command-line arguments. An example is:

Daysim – c [configuration_file_name] – p [print_file_name]

Setting	Value	Description
ChoiceModelRunner	Default	Type of choice model runner
DataType	Default	Identifies the presence of client-specific household input data (currently only used for Actum)
Settings	DefaultSettings
WorkingSubpath	".\working"	Working directory name
OutputSubpath	".\outputs"	Output directory name
EstimationSubpath	".\estimation"	If estimation mode, estimation directory name
RandomSeed	1234	Initial seed value for the random number generator
ShouldSynchronizeRandomSeed	TRUE	If true, Daysim will use a seed for each person/tour/trip/model combination that depends only on the initial seed
NumberOfRandomSeeds	1000	Number of random seeds
RosterPath	.\jacksonville-roster_matrix.csv	Name of roster CSV file, including full directory path
RosterCombinationsPath	.\jacksonville_roster.combinations.csv	Name of valid roster combinations CSV file, including full directory path
SkimDelimiter	"44"	The delimiter for text_IJ (ascii text) skim input files (9=TAB, 32=space, 44=comma)
VotVeryLowLow	0	Boundary between VeryLow and Low VOT groups, in Monetary units per hour
VotLowMedium	6.78	Boundary between Low and Medium VOT groups, in Monetary units per hour
VotMediumHigh	20.89	Boundary between Medium and High VOT groups, in Monetary units per hour
VotHighVeryHigh	1001	Boundary between High and VeryHigh VOT groups, in Monetary units per hour
IxxiPath	.\jacksonville_worker_IXXIfractions.dat	The full path name for the input worker IXXI fractions file
IxxiDelimiter	32	The delimiter for the input file (9=TAB, 32=space, 44=comma)
IxxiFirstLineIsHeader	FALSE	If true, DaySim expects a header record for this file (all other raw data' files have headers)
RawParkAndRideNodePath	.\p_r_Nodes.dat	The full path name for the raw park and ride node file. (If none given, the park and ride mode will not be available)
RawParkAndRideNodeDelimiter	9	The delimiter for the input file (9=TAB, 32=space, 44=comma)
ImportParkAndRideNodes	TRUE	If TRUE, the raw file should be imported (always TRUE if ShouldRunRawConversion=true)
ShouldReadParkAndRideNodeSkim	FALSE	If true, will expect a skim matrix with the best park and ride node number for each OD pair
RawParcelPath	.\Jacksonville_mzbuffer_stline_1.dat	The full path name for the raw parcel or microzone input file
RawParcelDelimiter	32	The delimiter for the input file (9=TAB, 32=space, 44=comma)
RawZonePath	.\jacksonville_taz_indexes_1.dat	The full path name for the raw zone indexes input file
RawZoneDelimiter	9	The delimiter for the input file (9=TAB, 32=space, 44=comma)
RawHouseholdPath	.\jacksonville_household.dat	The full path name for the raw household input file
RawHouseholdDelimiter	32	The delimiter for the input file (9=TAB, 32=space, 44=comma)
OutputHouseholdPath	.\_household.tsv	The full path name for the household output file
OutputHouseholdDelimiter	9	The delimiter for the output file (9=TAB, 32=space, 44=comma)
RawPersonPath	.\jacksonville_person.dat	The full path name for the raw person input file
RawPersonDelimiter	32	The delimiter for the input file (9=TAB, 32=space, 44=comma)
OutputPersonPath	.\_person.tsv	The full path name for the person output file
OutputPersonDelimiter	9	The delimiter for the output file (9=TAB, 32=space, 44=comma)
OutputHouseholdDayPath	.\_household_day.tsv	The full path name for the household-day output file
OutputHouseholdDayDelimiter	9	The delimiter for the output file (9=TAB, 32=space, 44=comma)
OutputPersonDayPath	.\_person_day.tsv	The full path name for the person-day output file
OutputPersonDayDelimiter	9	The delimiter for the output file (9=TAB, 32=space, 44=comma)
OutputTourPath	.\_tour.tsv	The full path name for the tour output file
OutputTourDelimiter	9	The delimiter for the output file (9=TAB, 32=space, 44=comma)
OutputTripPath	.\_trip.tsv	The full path name for the trip output file
OutputTripDelimiter	9	The delimiter for the input file (9=TAB, 32=space, 44=comma)
ShouldRunRawConversion	TRUE	If true, DAYSIM will convert and input all of the raw data files listed below
MinParcelSize	10	The minimum microzone size variable (in units of 1/1000) to be considered available in destination sampling
UrbanThreshold	500	The minimum parcel size (based on households + employment in buffer 1) to be considered "urban" rather than "rural". (Used in auto ownership model calibration)
IsInEstimationMode	FALSE	TRUE if DaySim should be run in order to estimate a specific model, rather than running a simulation
ShouldRunChoiceModels	TRUE	A toggle switch to run all choice models (TRUE can be overridden by switches below and by individual model switches)
ShouldRunHouseholdModels	TRUE	A toggle switch to run household level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunPersonModels	TRUE	A toggle switch to run person level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunPersonDayModels	TRUE	A toggle switch to run person-day level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunTourModels	TRUE	A toggle switch to run tour level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunTourTripModels	TRUE	A toggle switch to run trip level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunSubtourModels	TRUE	A toggle switch to run subtour level models (used to perform partial runs, TRUE can be overridden by individual model switches)
ShouldRunSubtourTripModels	TRUE	A toggle switch to run trip level models for subtours (used to perform partial runs, TRUE can be overridden by individual model switches)
DestinationScale	0
EstimationModel	none	The name of the specific model to be estimated
ShouldOutputAlogitData	FALSE	TRUE if an Alogit data file for model estimation should be written
OutputAlogitDataPath	.\xxx.dat	The full pathname of the Alogit data file for model estimation
OutputAlogitControlPath	.\xxx.alo	The full pathname of the Alogit control (.ALO) file for model estimation
MaximumBlendingDistance	3	The maximum (network) distance for which short-distance blending should be used, in miles
ShowRunChoiceModelsStatus	TRUE	TRUE to show percent of households simulated on the screen during simulation
LargeDegreeOfParallelism	8	Controls the use of multiple processors for threading
SmallDegreeOfParallelism	4	Controls the use of multiple processors for threading
ShouldOutputTDMTripList	FALSE	TRUE to produce a separate trip list output file for use by other models
OutputTDMTripListPath	.\transims_trip_list.csv	The full path name of the output trip list file
TDMTripListDelimiter	44	The delimiter for the output file (9=TAB, 32=space, 44=comma)
UseTransimsTDMTripListFormat	TRUE	TRUE to write the output trip list file in the format to be used by Transims
PathImpedance_PathChoiceScaleFactor	1.5	A scale factor for the coefficients of the path type models (the inverse of a logsum coefficient in upper level models)
PathImpedance_AutoOperatingCostPerMile	0.12	The auto operating cost, in Monetary Units per Distance Unit
PathImpedance_TransitInVehicleTimeWeight	1	The relative weight on transit in-vehicle time in the transit and park and ride path type models
PathImpedance_TransitFirstWaitTimeWeight	2	The relative weight on transit first wait time in the transit and park and ride path type models
PathImpedance_TransitTransferWaitTimeWeight	2	The relative weight on transit transfer wait time in the transit and park and ride path type models
PathImpedance_TransitNumberBoardingsWeight	4	The relative weight on transit number of boardings in the transit and park and ride path type models
PathImpedance_TransitDriveAccessTimeWeight	2	The relative weight on transit drive access in-vehicle time in the park and ride path type models
PathImpedance_TransitWalkAccessTimeWeight	2	The relative weight on transit walk access and egress times in the transit and park and ride path type models
PathImpedance_WalkTimeWeight	2	The relative weight on walk mode time in the walk path type model
PathImpedance_BikeTimeWeight	2	The relative weight on bike mode time in the bike path type model
PathImpedance_WalkMinutesPerMile	20	The factor to convert parcel-based transit walk access/egress distance into time (in minutes per distance unit)
PathImpedance_TransitWalkAccessDistanceLimit	2	The maximum parcel-based transit walk access or egress distance allowed for available transit paths
PathImpedance_TransitWalkAccessDirectLimit	1	The maximum parcel-based transit walk access or egress distance allowed for direct transit paths to be chosen over mixed paths
PathImpedance_TransitSingleBoardingLimit	1.1	The maximum number of boardings for a transit path to be considered a "direct path" (no transfers)
PathImpedance_AutoTolledPathConstant	0	The path type constant for an auto path that includes a non-zero toll cost (reflects extra resistance to paying tolls)
PathImpedance_AvailablePathUpperTimeLimit	180	The maximum total (unweighted) path travel time for a path to be considered as an available option
PathImpedance_TransitLocalBusPathConstant	0	The path type constant for transit local bus only paths
PathImpedance_TransitPremiumBusPathConstant	0	The path type constant for transit premium bus (possibly plus feeder) paths
PathImpedance_TransitLightRailPathConstant	0.156	The path type constant for transit light rail (possibly plus feeder) paths
PathImpedance_TransitCommuterRailPathConstant	0.45	The path type constant for transit commuter rail (possibly plus feeder) paths
PathImpedance_TransitFerryPathConstant	0.45	The path type constant for transit passenger ferry (possibly plus feeder) paths
PathImpedance_TransitUsePathTypeSpecificTime	FALSE	A switch to use additional skims and weights to reflect transit submode-specific in-vehicle times (SACOG-specific)
PathImpedance_TransitPremiumBusTimeAdditiveWeight	0	An additive weight on premium bus submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)
PathImpedance_TransitLightRailTimeAdditiveWeight	-0.07	An additive weight on light rail submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)
PathImpedance_TransitCommuterRailTimeAdditiveWeight	-0.1	An additive weight on commuter rail submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)
PathImpedance_TransitFerryTimeAdditiveWeight	-0.05	An additive weight on passenger ferry submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)
PathImpedance_BikeUseTypeSpecificDistanceFractions	FALSE	A switch to use additional skims and weights to reflect bicycle distances on specific facility types (SACOG-specific)
PathImpedance_BikeType1DistanceFractionAdditiveWeight	0	An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)
PathImpedance_BikeType2DistanceFractionAdditiveWeight	0	An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)
PathImpedance_BikeType3DistanceFractionAdditiveWeight	0	An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)
PathImpedance_BikeType4DistanceFractionAdditiveWeight	0	An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)
PathImpedance_TransitUseFareDiscountFractions	TRUE	A switch to use transit fare discount fractions based on person type and age
PathImpedance_TransitFareDiscountFractionChildUnder5	0.8	Transit fare discount fraction for children under age 5
PathImpedance_TransitFareDiscountFractionChild5To15	0.5	Transit fare discount fraction for children age 5 to 15
PathImpedance_TransitFareDiscountFractionHighSchoolStudent	0.5	Transit fare discount fraction for high school students (children age 16+)
PathImpedance_TransitFareDiscountFractionUniverityStudent	0.5	Transit fare discount fraction for college students
PathImpedance_TransitFareDiscountFractionAge65Up	0.5	Transit fare discount fraction for adults age 65+
PathImpedance_TransitPassCostPercentChangeVersusBase	0	Policy input variable to change the cost of transit passes with respect to the base year
Coefficients_BaseCostCoefficientPerDollar	-0.15	A base cost coefficient (per monetary unit), when income = BaseCostCoefficientIncomeLevel
Coefficients_BaseCostCoefficientIncomeLevel	30000	The household income level (monetary units per year) where the cost coefficient is the BaseCostCoefficient
Coefficients_CostCoefficientIncomePower_Work	0.6	The power function exponent to use for adjusting the cost coefficient for income, for work tours
Coefficients_CostCoefficientIncomePower_Other	0.5	The power function exponent to use for adjusting the cost coefficient for income, for non-work tours
Coefficients_MeanTimeCoefficient_Work	-0.03	The mean time coefficient (/minute) for work tours
Coefficients_MeanTimeCoefficient_Other	-0.015	The mean time coefficient (/minute) for non-work tours
Coefficients_StdDeviationTimeCoefficient_Work	0.24	The standard deviation of the time coefficient (/minute) for work tours, when using random VOT distribution
Coefficients_StdDeviationTimeCoefficient_Other	0.15	The standard deviation of the time coefficient (/minute) for non-work tours, when using random VOT distribution
Coefficients_HOV2CostDivisor_Work	1.741	The divisor for the cost coefficient for the HOV2 mode for work tours (to reflect cost-sharing)
Coefficients_HOV2CostDivisor_Other	1.625	The divisor for the cost coefficient for the HOV2 mode for non-work tours (to reflect cost-sharing)
Coefficients_HOV3CostDivisor_Work	2.408	The divisor for the cost coefficient for the HOV3+ mode for work tours (to reflect cost-sharing)
Coefficients_HOV3CostDivisor_Other	2.158	The divisor for the cost coefficient for the HOV3+ mode for non-work tours (to reflect cost-sharing)
UseRandomVotDistribution	TRUE	TRUE to randomly simulate a time coefficient for each tour, using a log-normal distribution
ShouldRunTrace	FALSE	TRUE to trace the details of the simulation for a specific household (for diagnostics/debugging)
TracePath	.\trace.txt	The full path name for the trace output file
HouseholdIdForTrace	1	The household ID for the trace
ShouldLoadAggregateLogsumsFromFile	FALSE	TRUE to read the aggregate logsums from a file generated by a previous run (otherwise they are re-calculated)
ShouldOutputAggregateLogsums	TRUE	TRUE to write the aggregate logsums to a file for a subsequent run
OutputAggregateLogsumsPath	.\aggregate_logsums.dat	The full path name for the file where the aggregate logsums are written
ShouldLoadSamplingWeightsFromFile	FALSE	TRUE to read the pre-calculated sampling weights from a file generated by a previous run (otherwise they are re-calculated)
ShouldOutputSamplingWeights	TRUE	TRUE to write the pre-calculated sampling weights to a file for a subsequent run
OutputSamplingWeightsPath	.\sampling_weights.dat	The full path name for the file where the sampling weights are written
WorkLocationModelSampleSize	50	The maximum number of destinations to be sampled for this model
WorkLocationModelCoefficients	.\WorkLocationCoefficients_SACOG-v1.5.f12	The full path name for the coefficient file for this model
ShouldRunWorkLocationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkLocationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IncludeWorkLocationModel	TRUE	FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)
SchoolLocationModelSampleSize	50	The maximum number of destinations to be sampled for this model
SchoolLocationModelCoefficients	.\SchoolLocationCoefficients_SACOG-v1.8.f12	The full path name for the coefficient file for this model
ShouldRunSchoolLocationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceSchoolLocationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IncludeSchoolLocationModel	TRUE	FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)
PayToParkAtWorkplaceModelCoefficients	.\PayToParkAtWorkplaceCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunPayToParkAtWorkplaceModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTracePayToParkAtWorkplaceModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IncludePayToParkAtWorkplaceModel	TRUE	FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)
TransitPassOwnershipModelCoefficients	.\TransitPassOwnershipCoefficients_SACOG-v1.5.f12	The full path name for the coefficient file for this model
ShouldRunTransitPassOwnershipModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceTransitPassOwnershipModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IncludeTransitPassOwnershipModel	TRUE	FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)
AutoOwnershipModelCoefficients	.\AutoOwnershipCoefficients_SACOG-v1.5.f12	The full path name for the coefficient file for this model
ShouldRunAutoOwnershipModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceAutoOwnershipModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IndividualPersonDayPatternModelCoefficients	.\IndividualPersonDayPatternCoefficients_SACOG-v1.8.f12	The full path name for the coefficient file for this model
ShouldRunIndividualPersonDayPatternModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceIndividualPersonDayPatternModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
PersonExactNumberOfToursModelCoefficients	.\PersonExactNumberOfToursCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunPersonExactNumberOfToursModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTracePersonExactNumberOfToursModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkTourDestinationModelSampleSize	25	The maximum number of destinations to be sampled for this model
WorkTourDestinationModelCoefficients	.\WorkTourDestinationCoefficients_SACOG-v1.8.F12	The full path name for the coefficient file for this model
ShouldRunWorkTourDestinationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkTourDestinationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
OtherTourDestinationModelSampleSize	25	The maximum number of destinations to be sampled for this model
OtherTourDestinationModelCoefficients	.\OtherTourDestinationCoefficients_SACOG-v1.8.F12	The full path name for the coefficient file for this model
ShouldRunOtherTourDestinationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceOtherTourDestinationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkBasedSubtourGenerationModelCoefficients	.\WorkbasedSubtourGenerationCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunWorkBasedSubtourGenerationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkBasedSubtourGenerationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkTourModeModelCoefficients	.\WorkTourModeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunWorkTourModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkTourModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
SchoolTourModeModelCoefficients	.\SchoolTourModeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunSchoolTourModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceSchoolTourModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkBasedSubtourModeModelCoefficients	.\WorkBasedSubtourModeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunWorkBasedSubtourModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkBasedSubtourModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
EscortTourModeModelCoefficients	.\EscortTourModeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunEscortTourModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceEscortTourModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
OtherHomeBasedTourModeModelCoefficients	.\OtherHomeBasedTourModeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunOtherHomeBasedTourModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceOtherHomeBasedTourModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkTourTimeModelCoefficients	.\WorkTourTimeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunWorkTourTimeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkTourTimeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
SchoolTourTimeModelCoefficients	.\SchoolTourTimeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunSchoolTourTimeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceSchoolTourTimeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
OtherHomeBasedTourTimeModelCoefficients	.\OtherHomeBasedTourTimeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunOtherHomeBasedTourTimeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceOtherHomeBasedTourTimeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
WorkBasedSubtourTimeModelCoefficients	.\WorkbasedSubtourTimeCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunWorkBasedSubtourTimeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceWorkBasedSubtourTimeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IntermediateStopGenerationModelCoefficients	.\IntermediateStopGenerationCoefficients_SACOG-v1.5.F12	The full path name for the coefficient file for this model
ShouldRunIntermediateStopGenerationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceIntermediateStopGenerationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
IntermediateStopLocationModelSampleSize	50	The maximum number of destinations to be sampled for this model
IntermediateStopLocationModelCoefficients	.\IntermediateStopLocationCoefficients_SACOG-v1.8.F12	The full path name for the coefficient file for this model
ShouldRunIntermediateStopLocationModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceIntermediateStopLocationModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
TripModeModelCoefficients	.\TripModeCoefficients_SACOG-v1.5.f12	The full path name for the coefficient file for this model
ShouldRunTripModeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceTripModeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
TripTimeModelCoefficients	.\TripTimeCoefficients_SACOG-v1.5.f12	The full path name for the coefficient file for this model
ShouldRunTripTimeModel	TRUE	A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)
ShouldTraceTripTimeModel	FALSE	TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)
UseShortDistanceCircuityMeasures	FALSE	TRUE to read in and use parcel-specific circuity factors in the short distance blending calculations
HouseholdSamplingRateOneInX	1	The denominator of the fraction of households in the input sample to be simulated (e.g. 100 is for 1 / 100)
HouseholdSamplingStartWithY	1	The household number to simulate first (e.g. 2, in combination with 100 above would simulate HH 2, 102, 202, etc.)
ShouldUseShadowPricing	TRUE	TRUE to apply shadow pricing for the WorkLocation and SchoolLocation models
UsualWorkMicrozoneThreshold	5	Parcel-specific threshold used in the shadow price calculations
UsualSchoolMicrozoneThreshold	5	Parcel-specific threshold used in the shadow price calculations
UsualUniversityMicrozoneThreshold	5	Parcel-specific threshold used in the shadow price calculations
NumberOfMicrozonesInReportDiffs	10	Control for printing out reporting on shadow price calculations
UsualWorkPercentTolerance	0	Percentage tolerance to trigger work parcel shadow price adjustment
UsualWorkAbsoluteTolerance	0	Absolute tolerance to trigger work parcel shadow price adjustment
UsualSchoolPercentTolerance	0	Percentage tolerance to trigger school parcel shadow price adjustment
UsualSchoolAbsoluteTolerance	0	Absolute tolerance to trigger school parcel shadow price adjustment
UsualUniversityPercentTolerance	0	Percentage tolerance to trigger university parcel shadow price adjustment
UsualUniversityAbsoluteTolerance	0	Absolute tolerance to trigger university parcel shadow price adjustment
ShadowPriceDelimiter	9	The delimiter for the shadow price files (9=TAB, 32=space, 44=comma)
NBatches	16
NProcessors	4	Number of processors to be used
ShouldUseParkAndRideShadowPricing	TRUE	If, True park and ride shadow pricing would be used in the model
ParkAndRideShadowPriceDelimiter	9	The delimiter for the park and ride shadow pricing file (9=TAB, 32=space, 44=comma)
ParkAndRideShadowPriceMaximumPenalty	-20
ParkAndRideShadowPriceTimeSpread	5

Seed Shadow Price

The see shadow price file is created by running the long-term models (work and school location choice) in DaySim ten times while continuously updating the shadow prices during each iteration. It needs to be only run once per scenario by checking “Update Shadow Price” checkbox. This runs the “ShadowPrice” application within “DaySim” application. Each time DaySim long term models are run, a shadow price file “shadow_prices.txt” is created in the working directory \Master\{SCENARIO_DIR}\Output\DaySim\working. At the end of ten iterations, the shadow price file is copied from the working directory to \Master\{SCENARIO_DIR}\Input\DaySimInput\09_SeedShadow\shadow_prices.txt. At beginning of each run this file is copied back to the working directory so that DaySim could use it while simulating work and school parcel location choices.

DaySim Outputs

The person, tour and trip level output files contain all of the variables predicted by DaySim, plus ID variables to cross-reference each other and the input data files in order to append more information if necessary. These output files are under the scenario directory \Master\{SCENARIO_DIR}\Output\DaySim.

Household and Household Day Files

The DaySim household and household day output files append the model predicted information into the household input files. Household output file is \Master\{SCENARIO_DIR}\Output\DaySim\_household.tsv, in the exact same format as the input file in Table 4‑18.

The household day output file is at \Master\{SCENARIO_DIR}\Output\DaySim \household_day.tsv.

TABLE 4-25 HOUSEHOLD DAY FILE

FIELD	DESCRIPTION
ID	internal DaySim record ID
HHNO	Household id
DAY	Diary / simulation day ID
DOW	Day of week
JTTOURS	HH fully joint tours in day
PHTOURS	HH partially joint half tours
FHTOURS	HH fully joint half tours
HDEXPFAC	HH day expansion factor

Person and Person Day Files

The person output file is \Master\{SCENARIO_DIR}\Output\DaySim\_person.tsv; in the exact same format as the input file in Table 4‑19.

The person-day output file has the person-day-level variables from a previous run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_person_day.tsv.

TABLE 4-26 PERSON DAY FILE FORMAT

FIELD	DESCRIPTION
ID	internal DaySim record ID
PERSON_ID	internal DaySim record ID
HOUSEHOLD_DAY_ID	internal DaySim record ID
HHNO	Household id
PNO	person sequential number on file
DAY	Diary / simulation day ID
BEGHOM	Dairy day begins at home?
ENDHOM	Dairy day ends at home?
HBTOURS	home based tours in day
WBTOURS	work based tours in day
UWTOURS	tours to usual workplace in day
WKTOURS	work tours
SCTOURS	school tours
ESTOURS	escort tours
PBTOURS	personal business Tours
SHTOURS	shopping tours
MLTOURS	meal tours
SOTOURS	social tours
RETOURS	recreation tours
METOURS	medical tours
WKSTOPS	work stops in day
SCSTOPS	school stops in day
ESSTOPS	escort stops in day
PBSTOPS	personal bus stops in day
SHSTOPS	shopping stops in day
MLSTOPS	meal stops in day
SOSTOPS	social stops in day
RESTOPS	recreation stops in day
MESTOPS	medical stops in day
WKATHOME	Minutes worked at home in day
PDEXPFAC	Person-day expansion factor

Tour File

This file has tour-level variables based by all persons predicted by a previous DaySim run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_tour.tsv. The following table summarizes the contents of this file.

TABLE 4-27 TOUR FILE

FIELD	DESCRIPTION
ID	internal DaySim record ID
PERSON_ID	internal DaySim record ID
PERSON_DAY_ID	internal DaySim record ID
HHNO	Household ID
PNO	person sequential number on file
DAY	Diary / simulation day ID
TOUR	tour ID
JTINDEX	household joint tour index
PARENT	parent tour ID
SUBTRS	number of sub-tours
PDPURP	primary destination purpose
TLVORIG	time leave tour origin
TARDEST	time arrive tour destination
TLVDEST	time leave tour destination
TARORIG	time arrive tour origin
TOADTYP	tour origin address type
TDADTYP	tour destination address type
TOPCL	tour origin parcel
TOTAZ	tour origin TAZ
TDPCL	tour destination parcel
TDTAZ	tour destination TAZ
TMODETP	tour main mode type
TPATHTP	tour main mode path type
TAUTOTIME	tour 1-way auto time
TAUTOCOST	tour 1-way auto distance
TAUTODIST	tour 1-way auto cost
TRIPSH1	1st half tour number of trips
TRIPSH2	2nd half tour number of trips
PHTINDX1	1st half-partial joint half tour index
PHTINDX2	2nd half-partial joint half tour index
FHTINDX1	1s half- fully joint half tour index
FHTINDX2	2nd half- fully joint half tour index
TOEXPFAC	trip expansion factor

Trip File

This file has trip-level variables for all trips predicted from a previous DaySim run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_trip.tsv.

TABLE 4-28 DAYSIM OUTPUT TRIP FILE

FIELD	DESCRIPTION
ID	internal DaySim record ID
TOUR_ID	internal DaySim record ID
HHNO	household ID
PNO	person sequence number on file
DAY	diary / simulation day ID
TOUR	tour ID
HALF	tour half
TSEG	trip segment number within half tour
TSVID	original survey trip ID number
OPURP	trip origin purpose
DPURP	trip destination purpose
OADTYP	trip origin address type
DADTYP	trip destination address type
OPCL	trip origin parcel
OTAZ	trip origin zone
DPCL	trip destination parcel
DTAZ	trip destination zone
MODE	trip mode
PATHTYPE	transit sub-mode
DORP	trip driver or passenger
DEPTM	trip departure time (min after 3 am)
ARRTM	trip arrival time (min after 3 am)
ENDACTTM	trip destination activity end time
TRAVTIME	network travel time, min (by SOV)
TRAVCOST	network travel time, min (by SOV)
TRAVDIST	network travel distance, miles (by SOV)
VOT	trip value of time (cents/minute)
TREXPFAC	trip expansion factor

@@ Line 1: / Line 1: @@
 [[Category:4.0 Directory & Data Structures]]
+<h3 id="id-4.3DAYSIM-ParcelInputPreparation"><span style="color: rgb(255,102,0);">Parcel Input Preparation</span></h3><p class="BodyParagraph">TAZ level household, employment and school enrollment are allocated to parcels using the allocation tool. The location of allocation is \User.prg\DaySim_Inputs\1_Parcel\AllocationTool\AllocationTool.exe. It must be noted again that this tool was built after NERPM-AB model development and hence, allocation for the model was done manually.</p><p class="BodyParagraph">The allocation tool requires following four inputs:</p><ul><li>TAZ file</li><li>Block file</li><li>TAZ-Block intersect file</li><li>School file</li></ul><h4 id="id-4.3DAYSIM-TAZFile"><em>TAZ File</em></h4><p class="BodyParagraph">The TAZ file used as input to the parcel allocation tool contains TAZ-level information control totals of employment by industrial sector, households and enrollment school type, which are disaggregated down to the parcel level. </p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-4PARCELALLOCATIONTOOLTAZINPUTFILE">TABLE 4-4 PARCEL ALLOCATION TOOL TAZ INPUT FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>TAZ</p>
+|  class="confluenceTd" | <p>taz number</p>
+|-
+|  class="confluenceTd" | <p>XCOORD</p>
+|  class="confluenceTd" | <p>X coordinate of taz centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>YCOORD</p>
+|  class="confluenceTd" | <p>Y coordinate of taz centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>AREA</p>
+|  class="confluenceTd" | <p>taz area – square feet</p>
+|-
+|  class="confluenceTd" | <p>HH10</p>
+|  class="confluenceTd" | <p>households in taz</p>
+|-
+|  class="confluenceTd" | <p>EMP_{by_Industry}</p>
+|  class="confluenceTd" | <p>{industry} employment in taz</p>
+|}</div><h4 id="id-4.3DAYSIM-BlockFile"><em>Block File</em></h4><p class="BodyParagraph">The block file used as input to the parcel distribution tool contains key information describing employment by sector and households, which are used to inform the disaggregation of the TAZ-level controls.  There are two primary sources for this block–level information:  Household information the US Census Bureau’s American Community Survey, while information on employment by industrial sector is derived from US Census Bureau’s Local Employment Dynamics database.  Table 4‑5 summarizes the contents of the block file.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-5PARCELALLOCATIONTOOLBLOCKINPUTFILE">TABLE 4-5 PARCEL ALLOCATION TOOL BLOCK INPUT FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>blockid10</p>
+|  class="confluenceTd" | <p>Block id number</p>
+|-
+|  class="confluenceTd" | <p>xcoord</p>
+|  class="confluenceTd" | <p>X coordinate of block centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord</p>
+|  class="confluenceTd" | <p>Y coordinate of block centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>SQFT</p>
+|  class="confluenceTd" | <p>block area – square feet</p>
+|-
+|  class="confluenceTd" | <p>IFE002</p>
+|  class="confluenceTd" | <p>households in block</p>
+|-
+|  class="confluenceTd" | <p>CNS01</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 11 (agriculture, forestry, fishing, and hunting)</p>
+|-
+|  class="confluenceTd" | <p>CNS02</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 21 (mining, quarrying, and oil and gas extraction)</p>
+|-
+|  class="confluenceTd" | <p>CNS03</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 22 (utilities)</p>
+|-
+|  class="confluenceTd" | <p>CNS04</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 23 (construction)</p>
+|-
+|  class="confluenceTd" | <p>CNS05</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 31-33 (manufacturing)</p>
+|-
+|  class="confluenceTd" | <p>CNS06</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 42 (wholesale trade)</p>
+|-
+|  class="confluenceTd" | <p>CNS07</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 44-45 (retail trade)</p>
+|-
+|  class="confluenceTd" | <p>CNS08</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 48-49 (transportation and warehousing)</p>
+|-
+|  class="confluenceTd" | <p>CNS09</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 51 (information)</p>
+|-
+|  class="confluenceTd" | <p>CNS10</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 52 (finance and insurance)</p>
+|-
+|  class="confluenceTd" | <p>CNS11</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 53 (real estate and rental and leasing)</p>
+|-
+|  class="confluenceTd" | <p>CNS12</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 54 (professional, scientific, and technical services)</p>
+|-
+|  class="confluenceTd" | <p>CNS13</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 55 (management of companies and enterprise)</p>
+|-
+|  class="confluenceTd" | <p>CNS14</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 56 (administrative and support and waste management and remediation services)</p>
+|-
+|  class="confluenceTd" | <p>CNS15</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 61 (educational services)</p>
+|-
+|  class="confluenceTd" | <p>CNS16</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 62 (health care and social assistance)</p>
+|-
+|  class="confluenceTd" | <p>CNS17</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 71 (arts, entertainment, and recreation)</p>
+|-
+|  class="confluenceTd" | <p>CNS18</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 72 (accommodation and food services)</p>
+|-
+|  class="confluenceTd" | <p>CNS19</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 81 (other services, except public administration)</p>
+|-
+|  class="confluenceTd" | <p>CNS20</p>
+|  class="confluenceTd" | <p>Number of jobs in NAICS sector 92 (public administration)</p>
+|-
+|  class="confluenceTd" | <p>C000</p>
+|  class="confluenceTd" | <p>Total number of jobs in block</p>
+|}</div><h4 id="id-4.3DAYSIM-TAZ-BlockIntersectFile"><em>TAZ-Block Intersect File</em></h4><p>The TAZ-block intersect file is the source for the parcel geography.  This file is created by intersecting the Census block geography with the TAZ geography</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-6PARCELALLOCATIONTOOLTAZ-BLOCKINTERSECTINPUTFILE">TABLE 4-6 PARCEL ALLOCATION TOOL TAZ-BLOCK INTERSECT INPUT FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ID</p>
+|  class="confluenceTd" | <p>parcel/microzone id number</p>
+|-
+|  class="confluenceTd" | <p>XCOORD</p>
+|  class="confluenceTd" | <p>X coordinate of intersect centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>YCOORD</p>
+|  class="confluenceTd" | <p>Y coordinate of intersect centroid – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>AREA</p>
+|  class="confluenceTd" | <p>intersect area – square feet</p>
+|-
+|  class="confluenceTd" | <p>TAZID</p>
+|  class="confluenceTd" | <p>TAZ in which intersect is located</p>
+|-
+|  class="confluenceTd" | <p>BLOCKID</p>
+|  class="confluenceTd" | <p>Block in which intersect is located</p>
+|}</div><h4 id="id-4.3DAYSIM-SchoolFile"><em>School File</em></h4><p class="BodyParagraph">School location-level information on enrollment is necessary to order to ensure that the proper number of students are being attracted to each school location.  Unlike employment and households, for which we must rely on block-level and TAZ-level information in order to derive parcel-level totals for these attributes, the allocation tool uses school specific information to associate enrollment with parcels.  The data must include information on enrollment by grade for all schools in the region. It is recommended that the school locations be geocoded and visually inspected using land use information and aerial photos to ensure that schools are being placed in their correct locations.  DaySim distinguishes school enrollment into three enrollment sectors:</p><ul><li>Grade school enrollment (K-8)</li><li>High school enrollment (9-12)</li><li>University enrollment (post-secondary)</li></ul><p class="BodyParagraph">Future year school enrollment assumptions may be adjusted either by scaling the enrollment at the existing school locations consistently or by identifying new parcels as locations for schools.  In either case, the amount of the scaled or additional enrollment should be consistent with the expected change in population by age, which can be derived from the trip-based model inputs. The file contents are provided in Table 4‑7.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-7PARCELALLOCATIONTOOLSCHOOLINPUTFILE">TABLE 4-7 PARCEL ALLOCATION TOOL SCHOOL INPUT FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+!  class="highlight-red confluenceTh" data-highlight-colour="red" | <p>FIELD</p>
+!  class="highlight-red confluenceTh" data-highlight-colour="red" | <p>DESCRIPTION</p>
+|-
+|  class="confluenceTd" | <p>SCHID</p>
+|  class="confluenceTd" | <p>School ID</p>
+|-
+|  class="confluenceTd" | <p>MZID</p>
+|  class="confluenceTd" | <p>Parcel/Microzone id</p>
+|-
+|  class="confluenceTd" | <p>XCOORD</p>
+|  class="confluenceTd" | <p>X coordinate of school – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>YCOORD</p>
+|  class="confluenceTd" | <p>Y coordinate of school – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>STUGRD</p>
+|  class="confluenceTd" | <p>grade school enrollment in taz</p>
+|-
+|  class="confluenceTd" | <p>STUHGH</p>
+|  class="confluenceTd" | <p>high school enrollment in taz</p>
+|-
+|  class="confluenceTd" | <p>STUUNI</p>
+|  class="confluenceTd" | <p>university enrollment in taz</p>
+|}</div><h3 id="id-4.3DAYSIM-ShortDistanceImpedanceGeneration"><span style="color: rgb(255,102,0);">Short Distance Impedance Generation</span></h3><p class="BodyParagraph">This process is required to generate more accurate short distances based on an all streets network. DTALite, a dynamic traffic assignment software, is used to generate node-to-node shortest path distances using the all streets network. The executable is called “DTALite_64.exe” (in \User.prg\DaySim_Inputs\1_Parcel\Buffering\) and requires the following input files:</p><ul><li>Node file</li><li>Link file</li><li>Link type file</li><li>Node pairs file</li></ul><h4 id="id-4.3DAYSIM-NodeFile"><em>Node File</em></h4><p class="BodyParagraph">This file provides DTALite with the locations of all the nodes in the all streets network and has the following format. It has to be named “input_node.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-8DTALITEINPUTNODEFILEFORMAT">TABLE 4-8 DTALITE INPUT NODE FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>NODEID</p>
+|  class="confluenceTd" | <p>Node id number</p>
+|-
+|  class="confluenceTd" | <p>XCOORD</p>
+|  class="confluenceTd" | <p>X coordinate of node– state plane feet</p>
+|-
+|  class="confluenceTd" | <p>YCOORD</p>
+|  class="confluenceTd" | <p>Y coordinate of node – state plane feet</p>
+|}</div><h4 id="id-4.3DAYSIM-LinkFile"><em>Link File</em></h4><p class="BodyParagraph">This file provides DTALite with information about link attributes and the nodes they connect and has the following format. It has to be named “input_link.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. Only the first four fields are used in calculations. The remaining fields can use dummy values if that information is not readily available.</p><h4 id="id-4.3DAYSIM-TABLE4-9DTALITEINPUTLINKFILEFORMAT">TABLE 4-9 DTALITE INPUT LINK FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>REQUIRED</strong></p>
+|-
+|  class="confluenceTd" | <p>FROM_NODE_ID</p>
+|  class="confluenceTd" | <p>A node of the link</p>
+|  class="confluenceTd" | <p>Yes</p>
+|-
+|  class="confluenceTd" | <p>TO_NODE_ID</p>
+|  class="confluenceTd" | <p>B node of the link</p>
+|  class="confluenceTd" | <p>Yes</p>
+|-
+|  class="confluenceTd" | <p>LINK_ID</p>
+|  class="confluenceTd" | <p>Link id number</p>
+|  class="confluenceTd" | <p>Yes</p>
+|-
+|  class="confluenceTd" | <p>LENGTH_IN_MILE</p>
+|  class="confluenceTd" | <p>Link length in miles</p>
+|  class="confluenceTd" | <p>Yes</p>
+|-
+|  class="confluenceTd" | <p>DIRECTION</p>
+|  class="confluenceTd" | <p>Direction of the link</p>
+|  class="confluenceTd" | <p>No</p>
+|-
+|  class="confluenceTd" | <p>NAME</p>
+|  class="confluenceTd" | <p>Name of the link</p>
+|  class="confluenceTd" | <p>No</p>
+|-
+|  class="confluenceTd" | <p>SPEED_LIMIT_IN_MPH</p>
+|  class="confluenceTd" | <p>Speed limit</p>
+|  class="confluenceTd" | <p>No</p>
+|-
+|  class="confluenceTd" | <p>NUMBER_OF_LANES</p>
+|  class="confluenceTd" | <p>Number of lanes</p>
+|  class="confluenceTd" | <p>No</p>
+|-
+|  class="confluenceTd" | <p>LINK_TYPE</p>
+|  class="confluenceTd" | <p>Type of link</p>
+|  class="confluenceTd" | <p>No</p>
+|-
+|  class="confluenceTd" | <p>LANE_CAPACITY_IN_VHC_PER_HOUR</p>
+|  class="confluenceTd" | <p>Lane capacity</p>
+|  class="confluenceTd" | <p>No</p>
+|}</div><h4 id="id-4.3DAYSIM-LinkTypeFile"><em>Link Type File</em></h4><p class="BodyParagraph">This file provides DTALite with link type definitions and has the following format. It has to be named “input_link_type.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. However, the default provided with the model setup can be used instead of creating a new file each time. This is because the input in this file is not taken into consideration for just getting shortest path distances over the network.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-10DTALITEINPUTLINKTYPEFILEFORMAT">TABLE 4-10 DTALITE INPUT LINK TYPE FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>LINK_TYPE</p>
+|  class="confluenceTd" | <p>Link type code</p>
+|-
+|  class="confluenceTd" | <p>LINK_TYPE_NAME</p>
+|  class="confluenceTd" | <p>Link type name</p>
+|-
+|  class="confluenceTd" | <p>FREEEWAY_FLAG</p>
+|  class="confluenceTd" | <p>1 if freeway; 0 otherwise</p>
+|-
+|  class="confluenceTd" | <p>RAMP_FLAG</p>
+|  class="confluenceTd" | <p>1 if ramp; 0 otherwise</p>
+|-
+|  class="confluenceTd" | <p>ARTERIAL_FLAG</p>
+|  class="confluenceTd" | <p>1 if arterial; 0 otherwise</p>
+|}</div><h4 id="id-4.3DAYSIM-NodePairsFile"><em>Node Pairs File</em></h4><p class="BodyParagraph">This file provides DTALite with the specific node pairs for which network shortest path distance needs to calculated. As noted earlier, it is usually all nodes that are with 3-miles (Euclidean) of each other. It has to be named “input_od_pairs.csv” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\)” folder of the master model directory. The node pairs file needs to be in the following format.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-11DTALITEINPUTNODEPAIRSFILEFORMAT">TABLE 4-11 DTALITE INPUT NODE PAIRS FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>RECORD_ID</p>
+|  class="confluenceTd" | <p>Record id number</p>
+|-
+|  class="confluenceTd" | <p>ORIGIN_NODE_ID</p>
+|  class="confluenceTd" | <p>Origin node id</p>
+|-
+|  class="confluenceTd" | <p>DEST_NODE_ID</p>
+|  class="confluenceTd" | <p>Destination node id</p>
+|}</div><p class="BodyParagraph">There exists a utility “Network_DataPrepv2.exe” (also in \User.prg\DaySim_Inputs\1_Parcel\Buffering\) folder of the master model directory) that uses the node file (input_node.csv) and produces the node pairs file. The Euclidean distance threshold between the node pairs can be controlled by changing BUFRAD parameter in “netprep.ctl” file.</p><h4 id="id-4.3DAYSIM-Node-to-NodeDistanceFile"><em>Node-to-Node Distance File</em></h4><p class="BodyParagraph">When run, DTALite outputs a comma-separated text file named “output_shortest_path.txt”. This contains the shortest path distance information for all the network node pairs provided as input. The format of the file is as follows.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-12DTALITEOUTPUTNODEDISTANCEFILEFORMAT">TABLE 4-12 DTALITE OUTPUT NODE DISTANCE FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>RECORD_ID</p>
+|  class="confluenceTd" | <p>Record id number</p>
+|-
+|  class="confluenceTd" | <p>FROM_NODE_ID</p>
+|  class="confluenceTd" | <p>Origin node id</p>
+|-
+|  class="confluenceTd" | <p>TO_NODE_ID</p>
+|  class="confluenceTd" | <p>Destination node id</p>
+|-
+|  class="confluenceTd" | <p>DISTANCE</p>
+|  class="confluenceTd" | <p>Shortest path distance in miles</p>
+|}</div><h3 id="id-4.3DAYSIM-DaySimBufferingTool"><span style="color: rgb(255,102,0);">DaySim Buffering Tool</span></h3><p class="BodyParagraph">The Daysim buffering tool is run to prepare parcel input file for DaySim. The executable is called “DSBuffTool.exe” and can be found in the “\User.prg\DaySim_Inputs\1_Parcel\Buffering\” folder of the master model directory. The tool is run to prepare parcel input file for DaySim.</p><h4 id="id-4.3DAYSIM-BufferedParcelFile"><em>Buffered Parcel File</em></h4><p class="BodyParagraph">This is a space-delimited delimited ASCII text format file (.dat) with one row of data per parcel and is the primary file used to maintain socioeconomic information. The file begins with several fields that identify the parcel, and describe the physical location and size of the parcel, and then contains fields that describe the quantity of housing, school enrollment, and employment around the parcel using logistic distance decay curves with 1/8th mile and quarter mile inflection points. These two distance decay curves with 1/8<sup>th</sup> and quarter mile inflection points result in “buffer 1” and “buffer 2” variables respectively which are referred to in the file format table below.. In addition, the parcel file contains information about urban form and the transportation system on and close to the parcel, including the proximity to transit stops and the price and supply of parking.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-13BUFFEREDPARCELFILE">TABLE 4-13 BUFFERED PARCEL FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>id</p>
+|  class="confluenceTd" | <p>Parcel/Microzone ID number</p>
+|-
+|  class="confluenceTd" | <p>xcoord_p</p>
+|  class="confluenceTd" | <p>X coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord_p</p>
+|  class="confluenceTd" | <p>Y coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>sqft_p</p>
+|  class="confluenceTd" | <p>Area – square feet</p>
+|-
+|  class="confluenceTd" | <p>taz_p</p>
+|  class="confluenceTd" | <p>TAZ number</p>
+|-
+|  class="confluenceTd" | <p>lutype_p</p>
+|  class="confluenceTd" | <p>land use type</p>
+|-
+|  class="confluenceTd" | <p>hh_p</p>
+|  class="confluenceTd" | <p>households on parcel</p>
+|-
+|  class="confluenceTd" | <p>stugrd_p</p>
+|  class="confluenceTd" | <p>grade school enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>stuhgh_p</p>
+|  class="confluenceTd" | <p>high school enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>stuuni_p</p>
+|  class="confluenceTd" | <p>university enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empedu_p</p>
+|  class="confluenceTd" | <p>educational employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empfoo_p</p>
+|  class="confluenceTd" | <p>food employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empgov_p</p>
+|  class="confluenceTd" | <p>government employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empind_p</p>
+|  class="confluenceTd" | <p>industrial employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empmed_p</p>
+|  class="confluenceTd" | <p>medical employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empofc_p</p>
+|  class="confluenceTd" | <p>office employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empret_p</p>
+|  class="confluenceTd" | <p>retail employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empsvc_p</p>
+|  class="confluenceTd" | <p>service employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empoth_p</p>
+|  class="confluenceTd" | <p>other employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>emptot_p</p>
+|  class="confluenceTd" | <p>total employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>parkdy_p</p>
+|  class="confluenceTd" | <p>offstreet daily parking on parcel</p>
+|-
+|  class="confluenceTd" | <p>parkhr_p</p>
+|  class="confluenceTd" | <p>offstreet hourly parking on parcel</p>
+|-
+|  class="confluenceTd" | <p>ppricdyp</p>
+|  class="confluenceTd" | <p>offstreet daily parking price</p>
+|-
+|  class="confluenceTd" | <p>pprichrp</p>
+|  class="confluenceTd" | <p>offstreet hourly parking price</p>
+|-
+|  class="confluenceTd" | <p>hh_1</p>
+|  class="confluenceTd" | <p>households within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>stugrd_1</p>
+|  class="confluenceTd" | <p>grade school enrollment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>stuhgh_1</p>
+|  class="confluenceTd" | <p>high school enrollment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>stuuni_1</p>
+|  class="confluenceTd" | <p>university enrollment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empedu_1</p>
+|  class="confluenceTd" | <p>educational employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empfoo_1</p>
+|  class="confluenceTd" | <p>food employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empgov_1</p>
+|  class="confluenceTd" | <p>government employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empind_1</p>
+|  class="confluenceTd" | <p>industrial employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empmed_1</p>
+|  class="confluenceTd" | <p>medical employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empofc_1</p>
+|  class="confluenceTd" | <p>office employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empret_1</p>
+|  class="confluenceTd" | <p>retail employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empsvc_1</p>
+|  class="confluenceTd" | <p>service employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>empoth_1</p>
+|  class="confluenceTd" | <p>other employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>emptot_1</p>
+|  class="confluenceTd" | <p>total employment within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>parkdy_1</p>
+|  class="confluenceTd" | <p>offstreet daily parking within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>parkhr_1</p>
+|  class="confluenceTd" | <p>offstreet hourly parking within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>ppricdy1</p>
+|  class="confluenceTd" | <p>average offstreet daily parking price within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>pprichr1</p>
+|  class="confluenceTd" | <p>average offstreet hourly parking price within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>nodes1_1</p>
+|  class="confluenceTd" | <p>number of single link street nodes (dead ends) within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>nodes3_1</p>
+|  class="confluenceTd" | <p>number of three-link street nodes (T-intersections) within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>nodes4_1</p>
+|  class="confluenceTd" | <p>number of 4+ link street nodes (traditional 4-way +) within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>tstops_1</p>
+|  class="confluenceTd" | <p>number of transit stops within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>nparks_1</p>
+|  class="confluenceTd" | <p>number of open space parks within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>aparks_1</p>
+|  class="confluenceTd" | <p>open space area in square feet within buffer 1</p>
+|-
+|  class="confluenceTd" | <p>hh_2</p>
+|  class="confluenceTd" | <p>households within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>stugrd_2</p>
+|  class="confluenceTd" | <p>grade school enrollment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>stuhgh_2</p>
+|  class="confluenceTd" | <p>high school enrollment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>stuuni_2</p>
+|  class="confluenceTd" | <p>university enrollment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empedu_2</p>
+|  class="confluenceTd" | <p>educational employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empfoo_2</p>
+|  class="confluenceTd" | <p>food employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empgov_2</p>
+|  class="confluenceTd" | <p>government employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empind_2</p>
+|  class="confluenceTd" | <p>industrial employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empmed_2</p>
+|  class="confluenceTd" | <p>medical employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empofc_2</p>
+|  class="confluenceTd" | <p>office employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empret_2</p>
+|  class="confluenceTd" | <p>retail employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empsvc_2</p>
+|  class="confluenceTd" | <p>service employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>empoth_2</p>
+|  class="confluenceTd" | <p>other employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>emptot_2</p>
+|  class="confluenceTd" | <p>total employment within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>parkdy_2</p>
+|  class="confluenceTd" | <p>offstreet daily parking within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>parkhr_2</p>
+|  class="confluenceTd" | <p>offstreet hourly parking within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>ppricdy2</p>
+|  class="confluenceTd" | <p>average offstreet daily parking price within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>pprichr2</p>
+|  class="confluenceTd" | <p>average offstreet hourly parking price within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>nodes1_2</p>
+|  class="confluenceTd" | <p>number of single link street nodes (dead ends) within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>nodes3_2</p>
+|  class="confluenceTd" | <p>number of three-link street nodes (T-intersections) within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>nodes4_2</p>
+|  class="confluenceTd" | <p>number of 4+ link street nodes (traditional 4-way +) within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>tstops_2</p>
+|  class="confluenceTd" | <p>number of transit stops within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>nparks_2</p>
+|  class="confluenceTd" | <p>number of open space parks within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>aparks_2</p>
+|  class="confluenceTd" | <p>open space area in square feet within buffer 2</p>
+|-
+|  class="confluenceTd" | <p>dist_lbus</p>
+|  class="confluenceTd" | <p>distance to nearest local bus stop from parcel</p>
+|-
+|  class="confluenceTd" | <p>dist_ebus</p>
+|  class="confluenceTd" | <p>distance to nearest express bus stop from parcel</p>
+|-
+|  class="confluenceTd" | <p>dist_crt</p>
+|  class="confluenceTd" | <p>distance to nearest commuter rail stop from parcel</p>
+|-
+|  class="confluenceTd" | <p>dist_fry</p>
+|  class="confluenceTd" | <p>distance to nearest ferry stop from parcel</p>
+|-
+|  class="confluenceTd" | <p>dist_lrt</p>
+|  class="confluenceTd" | <p>distance to nearest light rail stop from parcel</p>
+|-
+|  class="confluenceTd" | <p>dist_park</p>
+|  class="confluenceTd" | <p>distance to nearest park from parcel</p>
+|}</div><p class="BodyParagraph">The following are the input files required for buffering process.</p><h4 id="id-4.3DAYSIM-BaseParcelFile"><em>Base Parcel File</em></h4><p class="BodyParagraph">This file contains information regarding location and land-use of parcels. The buffer variable calculations pivot off of this base file. This is an output generated from the distribution tool described earlier and has the following format.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-14BASEPARCEL/MICROZONEFILEFORMAT">TABLE 4-14 BASE PARCEL/MICROZONE FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>parcelid</p>
+|  class="confluenceTd" | <p>Parcel/Microzone ID number</p>
+|-
+|  class="confluenceTd" | <p>xcoord_p</p>
+|  class="confluenceTd" | <p>X coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord_p</p>
+|  class="confluenceTd" | <p>Y coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>sqft_p</p>
+|  class="confluenceTd" | <p>parcel area – square feet</p>
+|-
+|  class="confluenceTd" | <p>taz_p</p>
+|  class="confluenceTd" | <p>corresponding TAZ number</p>
+|-
+|  class="confluenceTd" | <p>block_p</p>
+|  class="confluenceTd" | <p>corresponding census block number</p>
+|-
+|  class="confluenceTd" | <p>hh_p</p>
+|  class="confluenceTd" | <p>households on parcel</p>
+|-
+|  class="confluenceTd" | <p>stugrd_p</p>
+|  class="confluenceTd" | <p>grade school enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>stuhgh_p</p>
+|  class="confluenceTd" | <p>high school enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>stuuni_p</p>
+|  class="confluenceTd" | <p>university enrollment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empedu_p</p>
+|  class="confluenceTd" | <p>educational employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empfoo_p</p>
+|  class="confluenceTd" | <p>food employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empgov_p</p>
+|  class="confluenceTd" | <p>government employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empind_p</p>
+|  class="confluenceTd" | <p>industrial employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empmed_p</p>
+|  class="confluenceTd" | <p>medical employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empofc_p</p>
+|  class="confluenceTd" | <p>office employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empret_p</p>
+|  class="confluenceTd" | <p>retail employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empsvc_p</p>
+|  class="confluenceTd" | <p>service employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>empoth_p</p>
+|  class="confluenceTd" | <p>other employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>emptot_p</p>
+|  class="confluenceTd" | <p>total employment on parcel</p>
+|-
+|  class="confluenceTd" | <p>parkdy_p</p>
+|  class="confluenceTd" | <p>offstreet daily parking on parcel</p>
+|-
+|  class="confluenceTd" | <p>parkhr_p</p>
+|  class="confluenceTd" | <p>offstreet hourly parking on parcel</p>
+|-
+|  class="confluenceTd" | <p>ppricdyp</p>
+|  class="confluenceTd" | <p>offstreet daily parking price</p>
+|-
+|  class="confluenceTd" | <p>pprichrp</p>
+|  class="confluenceTd" | <p>offstreet hourly parking price</p>
+|}</div><p class="BodyParagraph">Offstreet parking location and pricing information is used in the activity-based models system to influence mode and other choices.  Note that this parking information is focused on publically accessibility off-street locations and does not consider private off-street parking locations (such as those available only to workers in an office building), nor does it consider on-street parking location. Future year parking locations and costs can be easily added to the model system by simply updating the parcel base file to identify parking capacity and costs for individual parcels.  Where data is unavailable or unknown, the parking attributes should be set to 0.</p><h4 id="id-4.3DAYSIM-IntersectionDataFile"><em>Intersection Data File</em></h4><p class="BodyParagraph">A unique measure of urban form that DaySim incorporates is the number of intersections or nodes of different types around a parcel. These intersection types include, dead-ends (1 link), T-intersections (3-links), and tradition intersections (4+ links), and help characterize the pattern of urban development. The intersection data currently used is in a text file and has the following format.</p><h4 id="id-4.3DAYSIM-TABLE4-15INTERSECTIONDATFILEFORMAT">TABLE 4-15 INTERSECTION DAT FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>id</p>
+|  class="confluenceTd" | <p>Intersection ID number</p>
+|-
+|  class="confluenceTd" | <p>links</p>
+|  class="confluenceTd" | <p>Number of links associated with node</p>
+|-
+|  class="confluenceTd" | <p>xcoord_p</p>
+|  class="confluenceTd" | <p>X coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord_p</p>
+|  class="confluenceTd" | <p>Y coordinate – state plane feet</p>
+|}</div><p>A largely automated process has been developed to calculate these urban form measures based on detailed GIS street centerline files. This is more detailed than the modeled network, which does not include all streets. This GIS process analyses the GIS street centerline file to locate nodes and assigns an intersection type code to them based on the number of links joined to the node.</p><h4 id="id-4.3DAYSIM-TransitStopsFile"><em>Transit Stops File</em></h4><p class="BodyParagraph">In addition to using zone-level information on access times to transit, DaySim also incorporates detailed parcel -level information on the distance to transit by transit sub-mode. The following table summarizes the contents of this file.</p><h4 id="id-4.3DAYSIM-TABLE4-16TRANSITSTOPSFILEFORMAT">TABLE 4-16 TRANSIT STOPS FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>id</p>
+|  class="confluenceTd" | <p>Transit stop ID number</p>
+|-
+|  class="confluenceTd" | <p>mode</p>
+|  class="confluenceTd" | <p>Transit submode code</p><p>1=local bus</p><p>2=express bus</p><p>3=commuter rail</p><p>4=ferry</p><p>5=light rail</p>
+|-
+|  class="confluenceTd" | <p>xcoord_p</p>
+|  class="confluenceTd" | <p>X coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord_p</p>
+|  class="confluenceTd" | <p>Y coordinate – state plane feet</p>
+|}</div><p class="BodyParagraph">When developing or updating forecast year or project alternative networks, careful consideration should be given to the location of individual bus stops. In addition to the bus tops located in urban areas of the county, it is also necessary to incorporate bus stop locations for rural transit routes into the model. This fine-grained information is used by DaySim to develop parcel -level estimates of access time to transit.  Ideally, forecast year transit networks would include a similar level of detail.  Forecast year travel model transit network do include information on stop locations as part of the network coding.  However, these stop locations are constrained by the coarser travel model roadway networks, and thus may tend to make transit access times appear longer by not including stops that are on major roads included in the roadway network.  Model users should ensure that the future year transit stop location file used as input to the parcel preparation contains information consistent with expected future year alignments and stop spacing assumptions.</p><h4 id="id-4.3DAYSIM-Parks/OpenSpacesDataStopsFile"><em>Parks/Open Spaces Data Stops File</em></h4><p class="BodyParagraph">A unique feature of DaySim is that it incorporates measures of access to publically accessible open space.  Although open space is clearly an attractor of travel for recreational, social and other purposes, typically open space is not included in travel models because the traditional “size” measures used as input to travel models, such as employment and population, are not good indicators of the attractiveness of open space (i.e. a popular park will often have no employment and no population).  The open space measures incorporated into DaySim capture the proximity of each parcel to the nearest open space, and the amount of open space present in the buffer area around the parcel. The following table describes the format of the file.</p><h4 id="id-4.3DAYSIM-TABLE4-17OPENSPACEDATAFILEFORMAT">TABLE 4-17 OPEN SPACE DATA FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>id</p>
+|  class="confluenceTd" | <p>Open space ID number</p>
+|-
+|  class="confluenceTd" | <p>xcoord_p</p>
+|  class="confluenceTd" | <p>X coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>ycoord_p</p>
+|  class="confluenceTd" | <p>Y coordinate – state plane feet</p>
+|-
+|  class="confluenceTd" | <p>sqft</p>
+|  class="confluenceTd" | <p>Open space grid cell size in sq ft</p>
+|}</div><p class="BodyParagraph">The individual records in the open space file are based on converting a shapefile of regional, publically accessibility open spaces into a smaller set of open space grid cells.</p><p class="BodyParagraph">If all streets network based short trip distances need to be used, the buffering program requires two additional input files that are described in the previous section on short distance impedance generation:</p><ul><li>Node file (input_node.csv)</li><li>Node-to-node distance file (output_shortest_path.txt)</li></ul><h3 id="id-4.3DAYSIM-DaySimInputs"><span style="color: rgb(255,102,0);">DaySim Inputs</span></h3><h4 id="id-4.3DAYSIM-Parcels"><em>Parcels</em></h4><p class="BodyParagraph">The final parcel data input file is a tab-delimited ASCII text format file created by the project team. This file has the main land use inputs, including parcel-specific values, and buffered measures. DaySim can read these variables in any order, but the variable names must remain the same as those in Table 4‑13. Currently, this file is \Master\{SCENARIO_DIR}\ Input\DaySimInput\02_Parcel\ Jacksonville_parcel_decayandCirc.dat.</p><h4 id="id-4.3DAYSIM-SyntheticPopulation"><em>Synthetic Population</em></h4><p class="BodyParagraph">Tools used to convert PopGen outputs to DaySim format can be found in \User.prg\DaySim_Inputs\2_PopGen. The household file, an input to DaySim, contains household-level variable and is Master\{SCENARIO_DIR}\ Input\DaySimInput\03_Household\_jax_hrec.dat.</p><h4 id="id-4.3DAYSIM-TABLE4-18SYNTHETICPOPULATIONHOUSEHOLDFILE">TABLE 4-18 SYNTHETIC POPULATION HOUSEHOLD FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>Household id</p>
+|-
+|  class="confluenceTd" | <p>HHSIZE</p>
+|  class="confluenceTd" | <p>Household size</p>
+|-
+|  class="confluenceTd" | <p>HHVEHS</p>
+|  class="confluenceTd" | <p>Vehicles available</p>
+|-
+|  class="confluenceTd" | <p>HHWKRS</p>
+|  class="confluenceTd" | <p>Household workers</p>
+|-
+|  class="confluenceTd" | <p>HHFTW</p>
+|  class="confluenceTd" | <p>HH full time workers (type 1)</p>
+|-
+|  class="confluenceTd" | <p>HHPTW</p>
+|  class="confluenceTd" | <p>HH part time workers (type 2)</p>
+|-
+|  class="confluenceTd" | <p>HHRET</p>
+|  class="confluenceTd" | <p>HH retired adults (type 3)</p>
+|-
+|  class="confluenceTd" | <p>HHOAD</p>
+|  class="confluenceTd" | <p>HH other adults (type 4)</p>
+|-
+|  class="confluenceTd" | <p>HHUNI</p>
+|  class="confluenceTd" | <p>HH college students (type 5)</p>
+|-
+|  class="confluenceTd" | <p>HHHSC</p>
+|  class="confluenceTd" | <p>HH high school students (type 6)</p>
+|-
+|  class="confluenceTd" | <p>HH515</p>
+|  class="confluenceTd" | <p>HH kids age 5-15 (type 7)</p>
+|-
+|  class="confluenceTd" | <p>HHCU5</p>
+|  class="confluenceTd" | <p>HH kids age 0-4 (type 8)</p>
+|-
+|  class="confluenceTd" | <p>HHINCOME</p>
+|  class="confluenceTd" | <p>Household income ($)</p>
+|-
+|  class="confluenceTd" | <p>HOWNRENT</p>
+|  class="confluenceTd" | <p>Household own or rent</p>
+|-
+|  class="confluenceTd" | <p>HRESTYPE</p>
+|  class="confluenceTd" | <p>Household residence type</p>
+|-
+|  class="confluenceTd" | <p>HHPARCEL</p>
+|  class="confluenceTd" | <p>Residence parcel id</p>
+|-
+|  class="confluenceTd" | <p>HHTAZ</p>
+|  class="confluenceTd" | <p>Residence TAZ index number</p>
+|-
+|  class="confluenceTd" | <p>HHEXPFAC</p>
+|  class="confluenceTd" | <p>HH expansion factor</p>
+|-
+|  class="confluenceTd" | <p>SAMPTYPE</p>
+|  class="confluenceTd" | <p>Sample type (permanent, seasonal, groupquarter)</p>
+|}</div><p class="BodyParagraph">The person file, an input to DaySim, contains person-level variables and is Master\{SCENARIO_DIR}\ Input\DaySimInput\04_Person\_jax_prec.dat.</p><h4 id="id-4.3DAYSIM-TABLE4-19SYNTHETICPOPULATIONPERSONFILE">TABLE 4-19 SYNTHETIC POPULATION PERSON FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>Household id</p>
+|-
+|  class="confluenceTd" | <p>PNO</p>
+|  class="confluenceTd" | <p>person sequential id number on file</p>
+|-
+|  class="confluenceTd" | <p>PPTYP</p>
+|  class="confluenceTd" | <p>person type</p>
+|-
+|  class="confluenceTd" | <p>PAGEY</p>
+|  class="confluenceTd" | <p>age in years</p>
+|-
+|  class="confluenceTd" | <p>PGEND</p>
+|  class="confluenceTd" | <p>gender</p>
+|-
+|  class="confluenceTd" | <p>PWTYP</p>
+|  class="confluenceTd" | <p>worker type</p>
+|-
+|  class="confluenceTd" | <p>PWPCL</p>
+|  class="confluenceTd" | <p>usual work parcel id</p>
+|-
+|  class="confluenceTd" | <p>PWTAZ</p>
+|  class="confluenceTd" | <p>usual work TAZ</p>
+|-
+|  class="confluenceTd" | <p>PWAUTIME</p>
+|  class="confluenceTd" | <p>auto time to usual work</p>
+|-
+|  class="confluenceTd" | <p>PWAUDIST</p>
+|  class="confluenceTd" | <p>auto distance to usual work</p>
+|-
+|  class="confluenceTd" | <p>PSTYP</p>
+|  class="confluenceTd" | <p>student type</p>
+|-
+|  class="confluenceTd" | <p>PSPCL</p>
+|  class="confluenceTd" | <p>usual school parcel id</p>
+|-
+|  class="confluenceTd" | <p>PSTAZ</p>
+|  class="confluenceTd" | <p>usual school TAZ</p>
+|-
+|  class="confluenceTd" | <p>PSAUTIME</p>
+|  class="confluenceTd" | <p>auto time to usual work</p>
+|-
+|  class="confluenceTd" | <p>PSAUDIST</p>
+|  class="confluenceTd" | <p>auto distance to usual work</p>
+|-
+|  class="confluenceTd" | <p>PUWMODE</p>
+|  class="confluenceTd" | <p>usual mode to work</p>
+|-
+|  class="confluenceTd" | <p>PUWARRP</p>
+|  class="confluenceTd" | <p>Usual arrival period to work</p>
+|-
+|  class="confluenceTd" | <p>PUWDEPP</p>
+|  class="confluenceTd" | <p>Usual depart period from work</p>
+|-
+|  class="confluenceTd" | <p>PTPASS</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates an transit pass</p>
+|-
+|  class="confluenceTd" | <p>PPAIDPRK</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates paid parking available at workplace</p>
+|-
+|  class="confluenceTd" | <p>PDIARY</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates Person used paper diary</p>
+|-
+|  class="confluenceTd" | <p>PPROXY</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates an proxy response</p>
+|-
+|  class="confluenceTd" | <p>PSEXPFAC</p>
+|  class="confluenceTd" | <p>Person expansion factor</p>
+|}</div><h4 id="id-4.3DAYSIM-WorkerIXXIFraction"><em>Worker IXXI Fraction</em></h4><p class="BodyParagraph">The IXXI fractions file has the fraction of workers in each zone who work outside the region, and the fraction of jobs filled by workers from outside the region. This file is an ASCII space-delimited file. Its location is Master\{SCENARIO_DIR}\ Input\DaySimInput\05_ixxi\ _jax_worker_ixxifractions.dat.</p><h4 id="id-4.3DAYSIM-TABLE4-20WORKERIXXIFRACTIONFILE">TABLE 4-20 WORKER IXXI FRACTION FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ZoneID</p>
+|  class="confluenceTd" | <p>The TAZ number</p>
+|-
+|  class="confluenceTd" | <p>Worker_IXFrac</p>
+|  class="confluenceTd" | <p>The fraction of workers living in the zone who work outside the region</p>
+|-
+|  class="confluenceTd" | <p>Jobs_XIFrac</p>
+|  class="confluenceTd" | <p>The fraction of jobs in the zone filled by workers from outside the region</p>
+|}</div><h4 id="id-4.3DAYSIM-TAZIndexes"><em>TAZ Indexes</em></h4><p class="BodyParagraph">The TAZ index file assigns a continuous numbering to the zones. External zones are also identifies in the file. The file is in ASCII space-delimited file with header. Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 01_TAZ_Index\ _jax_taz_indexes.dat.</p><h4 id="id-4.3DAYSIM-TABLE4-21TAZINDEXFILE">TABLE 4-21 TAZ INDEX FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ZoneID</p>
+|  class="confluenceTd" | <p>The TAZ number</p>
+|-
+|  class="confluenceTd" | <p>Zone_ordinal</p>
+|  class="confluenceTd" | <p>A zone index number, generally starting at 1, with no gaps</p>
+|-
+|  class="confluenceTd" | <p>Dest_eligible</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates an internal zone that is eligible as a destination in Daysim</p>
+|-
+|  class="confluenceTd" | <p>External</p>
+|  class="confluenceTd" | <p>0/1 - 1 indicates an external zone, not eligible as a destination in Daysim</p>
+|}</div><h4 id="id-4.3DAYSIM-PNRNodes"><em>PNR Nodes</em></h4><p class="BodyParagraph">The PNR node file contains PNR location ids and corresponding capacity and parking cost. The file is ASCII space-delimited. Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 05_pnr\ jax_p_rNodes.dat.</p><h4 id="id-4.3DAYSIM-TABLE4-22PNRNODEFILE">TABLE 4-22 PNR NODE FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+!  class="highlight-red confluenceTh" data-highlight-colour="red" | <p>FIELD</p>
+!  class="highlight-red confluenceTh" data-highlight-colour="red" | <p>DESCRIPTION</p>
+|-
+|  class="confluenceTd" | <p>NodeID</p>
+|  class="confluenceTd" | <p>The park and ride node ID (can be the same as the ZoneID)</p>
+|-
+|  class="confluenceTd" | <p>ZoneID</p>
+|  class="confluenceTd" | <p>The TAZ number</p>
+|-
+|  class="confluenceTd" | <p>XCoord</p>
+|  class="confluenceTd" | <p>The X coordinate (in length units) of the park and ride node</p>
+|-
+|  class="confluenceTd" | <p>YCoord</p>
+|  class="confluenceTd" | <p>The Y coordinate (in length units) of the park and ride node</p>
+|-
+|  class="confluenceTd" | <p>Capacity</p>
+|  class="confluenceTd" | <p>The total capacity, in spaces, of the park and ride lot</p>
+|-
+|  class="confluenceTd" | <p>Cost</p>
+|  class="confluenceTd" | <p>The daily parking cost, in hundredths of monetary units, of the park and ride lot</p>
+|-
+|  class="confluenceTd" | <p>PNR</p>
+|  class="confluenceTd" | <p>PNR flag (1/99)</p>
+|-
+|  class="confluenceTd" | <p>KNR</p>
+|  class="confluenceTd" | <p>KNR flag (1/99)</p>
+|}</div><h4 id="id-4.3DAYSIM-Coefficients"><em>Coefficients</em></h4><p>Coefficient for each model is a separate text file (.F12 format) that can be edited by the user for calibration purpose. There are a total of 23 files corresponding to all the models. All coefficient files are in the same directory at \User.prg\DaySim\07_Coefficients. For example, the person day pattern model coefficient is a file named IndividualPersonDayPatternCoefficients_Jacksonville-v.5.F12 at that directory.</p><h4 id="id-4.3DAYSIM-FIGURE4-1COEFFICIENTFILEEXAMPLE">FIGURE 4-1 COEFFICIENT FILE EXAMPLE</h4><p><span class="confluence-embedded-file-wrapper"><img class="confluence-embedded-image" src="/wiki/download/attachments/1179712/Figure%204-1.png?version=1&amp;modificationDate=1433178311313&amp;api=v2" data-image-src="/wiki/download/attachments/1179712/Figure%204-1.png?version=1&amp;modificationDate=1433178311313&amp;api=v2" data-unresolved-comment-count="0" data-linked-resource-id="1179718" data-linked-resource-version="1" data-linked-resource-type="attachment" data-linked-resource-default-alias="Figure 4-1.png" data-base-url="https://rsginc.atlassian.net/wiki" data-linked-resource-content-type="image/png" data-linked-resource-container-id="1179712" data-linked-resource-container-version="6"></span></p><h4 id="id-4.3DAYSIM-Roster"><em>Roster</em></h4><p class="BodyParagraph">Skim files report the level of services on regional network. All skim files are in text (*.TXT) format. The roster file is a CSV file that lists all the impedance skim files to be read and used by Daysim.  Its location is \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 06_Roster\roster_jax.csv.</p><h4 id="id-4.3DAYSIM-TABLE4-23ROSTERFILE">TABLE 4-23 ROSTER FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>#variable</p>
+|  class="confluenceTd" | <p>Skim variable, with string that is used in the C# code</p>
+|-
+|  class="confluenceTd" | <p>mode</p>
+|  class="confluenceTd" | <p>Skim mode, valid values are walk, bike, SOV, HOV2, HOV3, and transit</p>
+|-
+|  class="confluenceTd" | <p>path-type</p>
+|  class="confluenceTd" | <p>Path type, valid values are full-network, bus, knr-bus, pnr-bus</p>
+|-
+|  class="confluenceTd" | <p>vot-group</p>
+|  class="confluenceTd" | <p>Value of time range, valid values are very-low, low, medium, high, and very-high (currently all values are medium)</p>
+|-
+|  class="confluenceTd" | <p>start-minute</p>
+|  class="confluenceTd" | <p>First minute for which skim applies, in minutes past midnight</p>
+|-
+|  class="confluenceTd" | <p>end-minute</p>
+|  class="confluenceTd" | <p>Last minute for which skim applies, in minutes past midnight (if lower than start-minute, then period spans midnight</p>
+|-
+|  class="confluenceTd" | <p>length</p>
+|  class="confluenceTd" | <p>Size of matrix (currently all values are maxzone)</p>
+|-
+|  class="confluenceTd" | <p>File-type</p>
+|  class="confluenceTd" | <p>Type of input file, current valid values are Text_IJ, BIN and null (leave as 0)</p>
+|-
+|  class="confluenceTd" | <p>name</p>
+|  class="confluenceTd" | <p>File name (assumes same directory as roster file).  Null is assumed for file type null</p>
+|-
+|  class="confluenceTd" | <p>field</p>
+|  class="confluenceTd" | <p>The field on the file (use 1 for BIN, for Text-IJ, the O and D zones are fields 1 and 2)</p>
+|-
+|  class="confluenceTd" | <p>transpose</p>
+|  class="confluenceTd" | <p>If TRUE, DaySim will use the transpose of the matrix that is read in</p>
+|-
+|  class="confluenceTd" | <p>blend-variable</p>
+|  class="confluenceTd" | <p>Variable that is used for short distance &quot;blending&quot; - the same mode is assumed</p>
+|-
+|  class="confluenceTd" | <p>blend-path-type</p>
+|  class="confluenceTd" | <p>Allows blending variable to be for a different path type, If null, same path type is assumed</p>
+|-
+|  class="confluenceTd" | <p>factor</p>
+|  class="confluenceTd" | <p>A factor to be applied to the matrix - e.g. 20 to turn walk distance to time. (If null, factor is 1)</p>
+|-
+|  class="confluenceTd" | <p>scaling</p>
+|  class="confluenceTd" | <p>If TRUE, matrix is scaled by 100 before being stored as a 2-byte integer. (BIN matrices are assumed to already be scaled)</p>
+|}</div><h4 id="id-4.3DAYSIM-RosterCombination"><em>Roster Combination</em></h4><p class="BodyParagraph">The &quot;Roster Combinations&quot; file gives the possible mode/path type combinations used in DaySim. It is a CSV file at \Master\{SCENARIO_DIR}\ Input\DaySimInput\ 06_Roster\roster.combinations_Jax.csv. The file has columns that enumerate the 9 modes used in the current model system (walk, bike, SOV, HOV2, HOV3, transit, park-and-ride, school-bus, other) and 8 rows that enumerate the path types currently used. The cells are TRUE for valid combinations within DaySim and FALSE otherwise.</p><h4 class="BodyParagraph" id="id-4.3DAYSIM-TABLE4-24ROSTERCOMBINATIONFILEEXAMPLE">TABLE 4-24 ROSTER COMBINATION FILE EXAMPLE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>#</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>WALK</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>BIKE</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>SOV</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>HOV2</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>HOV3</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>TRANSIT</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p class="TableHeadingGray"><strong>PNR</strong></p>
+|-
+|  class="confluenceTd" | <p>full-network</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|-
+|  class="confluenceTd" | <p>no-tolls</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|-
+|  class="confluenceTd" | <p>bus</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|-
+|  class="confluenceTd" | <p>project</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|-
+|  class="confluenceTd" | <p>pnr-bus</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|-
+|  class="confluenceTd" | <p>pnr-project</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|-
+|  class="confluenceTd" | <p>knr-bus</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">TRUE</p>
+|-
+|  class="confluenceTd" | <p>knr-project</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|  class="confluenceTd" | <p align="center">FALSE</p>
+|}</div><h4 id="id-4.3DAYSIM-Configuration"><em>Configuration</em></h4><p class="BodyParagraph">The configuration file is the main user input control file for DaySim. This file is an XML format. When running DaySim, the name of the configuration file and the name of the print log file can be given as command-line arguments. An example is:</p><p class="BodyParagraph">Daysim – c [configuration_file_name] – p [print_file_name]</p><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>Setting</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>Value</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>Description</strong></p>
+|-
+|  class="confluenceTd" | <p>ChoiceModelRunner</p>
+|  class="confluenceTd" | <p>Default</p>
+|  class="confluenceTd" | <p>Type of choice model runner</p>
+|-
+|  class="confluenceTd" | <p>DataType</p>
+|  class="confluenceTd" | <p>Default</p>
+|  class="confluenceTd" | <p>Identifies the presence of client-specific household input data (currently only used for Actum)</p>
+|-
+|  class="confluenceTd" | <p>Settings</p>
+|  class="confluenceTd" | <p>DefaultSettings</p>
+|  class="confluenceTd" |
+|-
+|  class="confluenceTd" | <p>WorkingSubpath</p>
+|  class="confluenceTd" | <p> &quot;.\working&quot;</p>
+|  class="confluenceTd" | <p>Working directory name</p>
+|-
+|  class="confluenceTd" | <p>OutputSubpath</p>
+|  class="confluenceTd" | <p> &quot;.\outputs&quot;</p>
+|  class="confluenceTd" | <p>Output directory name</p>
+|-
+|  class="confluenceTd" | <p>EstimationSubpath</p>
+|  class="confluenceTd" | <p> &quot;.\estimation&quot;</p>
+|  class="confluenceTd" | <p>If estimation mode, estimation directory name</p>
+|-
+|  class="confluenceTd" | <p>RandomSeed</p>
+|  class="confluenceTd" | <p>1234</p>
+|  class="confluenceTd" | <p>Initial seed value for the random number generator</p>
+|-
+|  class="confluenceTd" | <p>ShouldSynchronizeRandomSeed</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>If true, Daysim will use a seed for each person/tour/trip/model combination that depends only on the initial seed</p>
+|-
+|  class="confluenceTd" | <p>NumberOfRandomSeeds</p>
+|  class="confluenceTd" | <p>1000</p>
+|  class="confluenceTd" | <p>Number of random seeds</p>
+|-
+|  class="confluenceTd" | <p>RosterPath</p>
+|  class="confluenceTd" | <p>.\jacksonville-roster_matrix.csv</p>
+|  class="confluenceTd" | <p>Name of roster CSV file, including full directory path</p>
+|-
+|  class="confluenceTd" | <p>RosterCombinationsPath</p>
+|  class="confluenceTd" | <p>.\jacksonville_roster.combinations.csv</p>
+|  class="confluenceTd" | <p>Name of valid roster combinations CSV file, including full directory path</p>
+|-
+|  class="confluenceTd" | <p>SkimDelimiter</p>
+|  class="confluenceTd" | <p> &quot;44&quot;</p>
+|  class="confluenceTd" | <p>The delimiter for text_IJ (ascii text) skim input files (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>VotVeryLowLow</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Boundary between VeryLow and Low VOT groups, in Monetary units per hour</p>
+|-
+|  class="confluenceTd" | <p>VotLowMedium</p>
+|  class="confluenceTd" | <p>6.78</p>
+|  class="confluenceTd" | <p>Boundary between Low and Medium VOT groups, in Monetary units per hour</p>
+|-
+|  class="confluenceTd" | <p>VotMediumHigh</p>
+|  class="confluenceTd" | <p>20.89</p>
+|  class="confluenceTd" | <p>Boundary between Medium and High VOT groups, in Monetary units per hour</p>
+|-
+|  class="confluenceTd" | <p>VotHighVeryHigh</p>
+|  class="confluenceTd" | <p>1001</p>
+|  class="confluenceTd" | <p>Boundary between High and VeryHigh VOT groups, in Monetary units per hour</p>
+|-
+|  class="confluenceTd" | <p>IxxiPath</p>
+|  class="confluenceTd" | <p>.\jacksonville_worker_IXXIfractions.dat</p>
+|  class="confluenceTd" | <p>The full path name for the input worker IXXI fractions file</p>
+|-
+|  class="confluenceTd" | <p>IxxiDelimiter</p>
+|  class="confluenceTd" | <p>32</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>IxxiFirstLineIsHeader</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>If true, DaySim expects a header record for this file (all other raw data' files have headers)</p>
+|-
+|  class="confluenceTd" | <p>RawParkAndRideNodePath</p>
+|  class="confluenceTd" | <p>.\p_r_Nodes.dat</p>
+|  class="confluenceTd" | <p>The full path name for the raw park and ride node file. (If none given, the park and ride mode will not be available)</p>
+|-
+|  class="confluenceTd" | <p>RawParkAndRideNodeDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>ImportParkAndRideNodes</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>If TRUE, the raw file should be imported (always TRUE if ShouldRunRawConversion=true)</p>
+|-
+|  class="confluenceTd" | <p>ShouldReadParkAndRideNodeSkim</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>If true, will expect a skim matrix with the best park and ride node number for each OD pair</p>
+|-
+|  class="confluenceTd" | <p>RawParcelPath</p>
+|  class="confluenceTd" | <p>.\Jacksonville_mzbuffer_stline_1.dat</p>
+|  class="confluenceTd" | <p>The full path name for the raw parcel or microzone input file</p>
+|-
+|  class="confluenceTd" | <p>RawParcelDelimiter</p>
+|  class="confluenceTd" | <p>32</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>RawZonePath</p>
+|  class="confluenceTd" | <p>.\jacksonville_taz_indexes_1.dat</p>
+|  class="confluenceTd" | <p>The full path name for the raw zone indexes input file</p>
+|-
+|  class="confluenceTd" | <p>RawZoneDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>RawHouseholdPath</p>
+|  class="confluenceTd" | <p>.\jacksonville_household.dat</p>
+|  class="confluenceTd" | <p>The full path name for the raw household input file</p>
+|-
+|  class="confluenceTd" | <p>RawHouseholdDelimiter</p>
+|  class="confluenceTd" | <p>32</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputHouseholdPath</p>
+|  class="confluenceTd" | <p>.\_household.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the household output file</p>
+|-
+|  class="confluenceTd" | <p>OutputHouseholdDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>RawPersonPath</p>
+|  class="confluenceTd" | <p>.\jacksonville_person.dat</p>
+|  class="confluenceTd" | <p>The full path name for the raw person input file</p>
+|-
+|  class="confluenceTd" | <p>RawPersonDelimiter</p>
+|  class="confluenceTd" | <p>32</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputPersonPath</p>
+|  class="confluenceTd" | <p>.\_person.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the person output file</p>
+|-
+|  class="confluenceTd" | <p>OutputPersonDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputHouseholdDayPath</p>
+|  class="confluenceTd" | <p>.\_household_day.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the household-day output file</p>
+|-
+|  class="confluenceTd" | <p>OutputHouseholdDayDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputPersonDayPath</p>
+|  class="confluenceTd" | <p>.\_person_day.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the person-day output file</p>
+|-
+|  class="confluenceTd" | <p>OutputPersonDayDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputTourPath</p>
+|  class="confluenceTd" | <p>.\_tour.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the tour output file</p>
+|-
+|  class="confluenceTd" | <p>OutputTourDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>OutputTripPath</p>
+|  class="confluenceTd" | <p>.\_trip.tsv</p>
+|  class="confluenceTd" | <p>The full path name for the trip output file</p>
+|-
+|  class="confluenceTd" | <p>OutputTripDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the input file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunRawConversion</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>If true, DAYSIM will convert and input all of the raw data files listed below</p>
+|-
+|  class="confluenceTd" | <p>MinParcelSize</p>
+|  class="confluenceTd" | <p>10</p>
+|  class="confluenceTd" | <p>The minimum microzone size variable (in units of 1/1000) to be considered available in destination sampling</p>
+|-
+|  class="confluenceTd" | <p>UrbanThreshold</p>
+|  class="confluenceTd" | <p>500</p>
+|  class="confluenceTd" | <p>The minimum parcel size (based on households + employment in buffer 1) to be considered &quot;urban&quot; rather than &quot;rural&quot;. (Used in auto ownership model calibration)</p>
+|-
+|  class="confluenceTd" | <p>IsInEstimationMode</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE if DaySim should be run in order to estimate a specific model, rather than running a simulation</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunChoiceModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run all choice models (TRUE can be overridden by switches below and by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunHouseholdModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run household level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunPersonModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run person level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunPersonDayModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run person-day level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTourModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run tour level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTourTripModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run trip level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunSubtourModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run subtour level models (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunSubtourTripModels</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run trip level models for subtours (used to perform partial runs, TRUE can be overridden by individual model switches)</p>
+|-
+|  class="confluenceTd" | <p>DestinationScale</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" |
+|-
+|  class="confluenceTd" | <p>EstimationModel</p>
+|  class="confluenceTd" | <p>none</p>
+|  class="confluenceTd" | <p>The name of the specific model to be estimated</p>
+|-
+|  class="confluenceTd" | <p>ShouldOutputAlogitData</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE if an Alogit data file for model estimation should be written</p>
+|-
+|  class="confluenceTd" | <p>OutputAlogitDataPath</p>
+|  class="confluenceTd" | <p>.\xxx.dat</p>
+|  class="confluenceTd" | <p>The full pathname of the Alogit data file for model estimation</p>
+|-
+|  class="confluenceTd" | <p>OutputAlogitControlPath</p>
+|  class="confluenceTd" | <p>.\xxx.alo</p>
+|  class="confluenceTd" | <p>The full pathname of the Alogit control (.ALO) file for model estimation</p>
+|-
+|  class="confluenceTd" | <p>MaximumBlendingDistance</p>
+|  class="confluenceTd" | <p>3</p>
+|  class="confluenceTd" | <p>The maximum (network) distance for which short-distance blending should be used, in miles</p>
+|-
+|  class="confluenceTd" | <p>ShowRunChoiceModelsStatus</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to show percent of households simulated on the screen during simulation</p>
+|-
+|  class="confluenceTd" | <p>LargeDegreeOfParallelism</p>
+|  class="confluenceTd" | <p>8</p>
+|  class="confluenceTd" | <p>Controls the use of multiple processors for threading</p>
+|-
+|  class="confluenceTd" | <p>SmallDegreeOfParallelism</p>
+|  class="confluenceTd" | <p>4</p>
+|  class="confluenceTd" | <p>Controls the use of multiple processors for threading</p>
+|-
+|  class="confluenceTd" | <p>ShouldOutputTDMTripList</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to produce a separate trip list output file for use by other models</p>
+|-
+|  class="confluenceTd" | <p>OutputTDMTripListPath</p>
+|  class="confluenceTd" | <p>.\transims_trip_list.csv</p>
+|  class="confluenceTd" | <p>The full path name of the output trip list file</p>
+|-
+|  class="confluenceTd" | <p>TDMTripListDelimiter</p>
+|  class="confluenceTd" | <p>44</p>
+|  class="confluenceTd" | <p>The delimiter for the output file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>UseTransimsTDMTripListFormat</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to write the output trip list file in the format to be used by Transims</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_PathChoiceScaleFactor</p>
+|  class="confluenceTd" | <p>1.5</p>
+|  class="confluenceTd" | <p>A scale factor for the coefficients of the path type models (the inverse of a logsum coefficient in upper level models)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_AutoOperatingCostPerMile</p>
+|  class="confluenceTd" | <p>0.12</p>
+|  class="confluenceTd" | <p>The auto operating cost, in Monetary Units per Distance Unit</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitInVehicleTimeWeight</p>
+|  class="confluenceTd" | <p>1</p>
+|  class="confluenceTd" | <p>The relative weight on transit in-vehicle time in the transit and park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFirstWaitTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on transit first wait time in the transit and park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitTransferWaitTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on transit transfer wait time in the transit and park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitNumberBoardingsWeight</p>
+|  class="confluenceTd" | <p>4</p>
+|  class="confluenceTd" | <p>The relative weight on transit number of boardings in the transit and park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitDriveAccessTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on transit drive access in-vehicle time in the park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitWalkAccessTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on transit walk access and egress times in the transit and park and ride path type models</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_WalkTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on walk mode time in the walk path type model</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeTimeWeight</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The relative weight on bike mode time in the bike path type model</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_WalkMinutesPerMile</p>
+|  class="confluenceTd" | <p>20</p>
+|  class="confluenceTd" | <p>The factor to convert parcel-based transit walk access/egress distance into time (in minutes per distance unit)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitWalkAccessDistanceLimit</p>
+|  class="confluenceTd" | <p>2</p>
+|  class="confluenceTd" | <p>The maximum parcel-based transit walk access or egress distance allowed for available transit paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitWalkAccessDirectLimit</p>
+|  class="confluenceTd" | <p>1</p>
+|  class="confluenceTd" | <p>The maximum parcel-based transit walk access or egress distance allowed for direct transit paths to be chosen over mixed paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitSingleBoardingLimit</p>
+|  class="confluenceTd" | <p>1.1</p>
+|  class="confluenceTd" | <p>The maximum number of boardings for a transit path to be considered a &quot;direct path&quot; (no transfers)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_AutoTolledPathConstant</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>The path type constant for an auto path that includes a non-zero toll cost (reflects extra resistance to paying tolls)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_AvailablePathUpperTimeLimit</p>
+|  class="confluenceTd" | <p>180</p>
+|  class="confluenceTd" | <p>The maximum total (unweighted) path travel time for a path to be considered as an available option</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitLocalBusPathConstant</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>The path type constant for transit local bus only paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitPremiumBusPathConstant</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>The path type constant for transit premium bus (possibly plus feeder) paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitLightRailPathConstant</p>
+|  class="confluenceTd" | <p>0.156</p>
+|  class="confluenceTd" | <p>The path type constant for transit light rail (possibly plus feeder) paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitCommuterRailPathConstant</p>
+|  class="confluenceTd" | <p>0.45</p>
+|  class="confluenceTd" | <p>The path type constant for transit commuter rail (possibly plus feeder) paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFerryPathConstant</p>
+|  class="confluenceTd" | <p>0.45</p>
+|  class="confluenceTd" | <p>The path type constant for transit passenger ferry (possibly plus feeder) paths</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitUsePathTypeSpecificTime</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>A switch to use additional skims and weights to reflect transit submode-specific in-vehicle times (SACOG-specific)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitPremiumBusTimeAdditiveWeight</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>An additive weight on premium bus submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitLightRailTimeAdditiveWeight</p>
+|  class="confluenceTd" | <p>-0.07</p>
+|  class="confluenceTd" | <p>An additive weight on light rail submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitCommuterRailTimeAdditiveWeight</p>
+|  class="confluenceTd" | <p>-0.1</p>
+|  class="confluenceTd" | <p>An additive weight on commuter rail submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFerryTimeAdditiveWeight</p>
+|  class="confluenceTd" | <p>-0.05</p>
+|  class="confluenceTd" | <p>An additive weight on passenger ferry submode-specific in-vehicle time (adds to TransitInVehicleTimeWeight)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeUseTypeSpecificDistanceFractions</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>A switch to use additional skims and weights to reflect bicycle distances on specific facility types (SACOG-specific)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeType1DistanceFractionAdditiveWeight</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeType2DistanceFractionAdditiveWeight</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeType3DistanceFractionAdditiveWeight</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_BikeType4DistanceFractionAdditiveWeight</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>An additive weight on bike distance on Class 1 bike paths (adds to BikeTimeWeight, distance is converted to time)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitUseFareDiscountFractions</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A switch to use transit fare discount fractions based on person type and age</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFareDiscountFractionChildUnder5</p>
+|  class="confluenceTd" | <p>0.8</p>
+|  class="confluenceTd" | <p>Transit fare discount fraction for children under age 5</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFareDiscountFractionChild5To15</p>
+|  class="confluenceTd" | <p>0.5</p>
+|  class="confluenceTd" | <p>Transit fare discount fraction for children age 5 to 15</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFareDiscountFractionHighSchoolStudent</p>
+|  class="confluenceTd" | <p>0.5</p>
+|  class="confluenceTd" | <p>Transit fare discount fraction for high school students (children age 16+)</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFareDiscountFractionUniverityStudent</p>
+|  class="confluenceTd" | <p>0.5</p>
+|  class="confluenceTd" | <p>Transit fare discount fraction for college students</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitFareDiscountFractionAge65Up</p>
+|  class="confluenceTd" | <p>0.5</p>
+|  class="confluenceTd" | <p>Transit fare discount fraction for adults age 65+</p>
+|-
+|  class="confluenceTd" | <p>PathImpedance_TransitPassCostPercentChangeVersusBase</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Policy input variable to change the cost of transit passes with respect to the base year</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_BaseCostCoefficientPerDollar</p>
+|  class="confluenceTd" | <p>-0.15</p>
+|  class="confluenceTd" | <p>A base cost coefficient (per monetary unit), when income = BaseCostCoefficientIncomeLevel</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_BaseCostCoefficientIncomeLevel</p>
+|  class="confluenceTd" | <p>30000</p>
+|  class="confluenceTd" | <p>The household income level (monetary units per year) where the cost coefficient is the BaseCostCoefficient</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_CostCoefficientIncomePower_Work</p>
+|  class="confluenceTd" | <p>0.6</p>
+|  class="confluenceTd" | <p>The power function exponent to use for adjusting the cost coefficient for income, for work tours</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_CostCoefficientIncomePower_Other</p>
+|  class="confluenceTd" | <p>0.5</p>
+|  class="confluenceTd" | <p>The power function exponent to use for adjusting the cost coefficient for income, for non-work tours</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_MeanTimeCoefficient_Work</p>
+|  class="confluenceTd" | <p>-0.03</p>
+|  class="confluenceTd" | <p>The mean time coefficient (/minute) for work tours</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_MeanTimeCoefficient_Other</p>
+|  class="confluenceTd" | <p>-0.015</p>
+|  class="confluenceTd" | <p>The mean time coefficient (/minute) for non-work tours</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_StdDeviationTimeCoefficient_Work</p>
+|  class="confluenceTd" | <p>0.24</p>
+|  class="confluenceTd" | <p>The standard deviation of the time coefficient (/minute) for work tours, when using random VOT distribution</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_StdDeviationTimeCoefficient_Other</p>
+|  class="confluenceTd" | <p>0.15</p>
+|  class="confluenceTd" | <p>The standard deviation of the time coefficient (/minute) for non-work tours, when using random VOT distribution</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_HOV2CostDivisor_Work</p>
+|  class="confluenceTd" | <p>1.741</p>
+|  class="confluenceTd" | <p>The divisor for the cost coefficient for the HOV2 mode for work tours (to reflect cost-sharing)</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_HOV2CostDivisor_Other</p>
+|  class="confluenceTd" | <p>1.625</p>
+|  class="confluenceTd" | <p>The divisor for the cost coefficient for the HOV2 mode for non-work tours (to reflect cost-sharing)</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_HOV3CostDivisor_Work</p>
+|  class="confluenceTd" | <p>2.408</p>
+|  class="confluenceTd" | <p>The divisor for the cost coefficient for the HOV3+ mode for work tours (to reflect cost-sharing)</p>
+|-
+|  class="confluenceTd" | <p>Coefficients_HOV3CostDivisor_Other</p>
+|  class="confluenceTd" | <p>2.158</p>
+|  class="confluenceTd" | <p>The divisor for the cost coefficient for the HOV3+ mode for non-work tours (to reflect cost-sharing)</p>
+|-
+|  class="confluenceTd" | <p>UseRandomVotDistribution</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to randomly simulate a time coefficient for each tour, using a log-normal distribution</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTrace</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the details of the simulation for a specific household (for diagnostics/debugging)</p>
+|-
+|  class="confluenceTd" | <p>TracePath</p>
+|  class="confluenceTd" | <p>.\trace.txt</p>
+|  class="confluenceTd" | <p>The full path name for the trace output file</p>
+|-
+|  class="confluenceTd" | <p>HouseholdIdForTrace</p>
+|  class="confluenceTd" | <p>1</p>
+|  class="confluenceTd" | <p>The household ID for the trace</p>
+|-
+|  class="confluenceTd" | <p>ShouldLoadAggregateLogsumsFromFile</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to read the aggregate logsums from a file generated by a previous run (otherwise they are re-calculated)</p>
+|-
+|  class="confluenceTd" | <p>ShouldOutputAggregateLogsums</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to write the aggregate logsums to a file for a subsequent run</p>
+|-
+|  class="confluenceTd" | <p>OutputAggregateLogsumsPath</p>
+|  class="confluenceTd" | <p>.\aggregate_logsums.dat</p>
+|  class="confluenceTd" | <p>The full path name for the file where the aggregate logsums are written</p>
+|-
+|  class="confluenceTd" | <p>ShouldLoadSamplingWeightsFromFile</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to read the pre-calculated sampling weights from a file generated by a previous run (otherwise they are re-calculated)</p>
+|-
+|  class="confluenceTd" | <p>ShouldOutputSamplingWeights</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to write the pre-calculated sampling weights to a file for a subsequent run</p>
+|-
+|  class="confluenceTd" | <p>OutputSamplingWeightsPath</p>
+|  class="confluenceTd" | <p>.\sampling_weights.dat</p>
+|  class="confluenceTd" | <p>The full path name for the file where the sampling weights are written</p>
+|-
+|  class="confluenceTd" | <p>WorkLocationModelSampleSize</p>
+|  class="confluenceTd" | <p>50</p>
+|  class="confluenceTd" | <p>The maximum number of destinations to be sampled for this model</p>
+|-
+|  class="confluenceTd" | <p>WorkLocationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkLocationCoefficients_SACOG-v1.5.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkLocationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkLocationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IncludeWorkLocationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)</p>
+|-
+|  class="confluenceTd" | <p>SchoolLocationModelSampleSize</p>
+|  class="confluenceTd" | <p>50</p>
+|  class="confluenceTd" | <p>The maximum number of destinations to be sampled for this model</p>
+|-
+|  class="confluenceTd" | <p>SchoolLocationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\SchoolLocationCoefficients_SACOG-v1.8.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunSchoolLocationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceSchoolLocationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IncludeSchoolLocationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)</p>
+|-
+|  class="confluenceTd" | <p>PayToParkAtWorkplaceModelCoefficients</p>
+|  class="confluenceTd" | <p>.\PayToParkAtWorkplaceCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunPayToParkAtWorkplaceModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTracePayToParkAtWorkplaceModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IncludePayToParkAtWorkplaceModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)</p>
+|-
+|  class="confluenceTd" | <p>TransitPassOwnershipModelCoefficients</p>
+|  class="confluenceTd" | <p>.\TransitPassOwnershipCoefficients_SACOG-v1.5.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTransitPassOwnershipModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceTransitPassOwnershipModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IncludeTransitPassOwnershipModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>FALSE to always exclude this model from the set of models to be run (not sure how this is different from ShouldRun?)</p>
+|-
+|  class="confluenceTd" | <p>AutoOwnershipModelCoefficients</p>
+|  class="confluenceTd" | <p>.\AutoOwnershipCoefficients_SACOG-v1.5.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunAutoOwnershipModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceAutoOwnershipModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IndividualPersonDayPatternModelCoefficients</p>
+|  class="confluenceTd" | <p>.\IndividualPersonDayPatternCoefficients_SACOG-v1.8.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunIndividualPersonDayPatternModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceIndividualPersonDayPatternModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>PersonExactNumberOfToursModelCoefficients</p>
+|  class="confluenceTd" | <p>.\PersonExactNumberOfToursCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunPersonExactNumberOfToursModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTracePersonExactNumberOfToursModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkTourDestinationModelSampleSize</p>
+|  class="confluenceTd" | <p>25</p>
+|  class="confluenceTd" | <p>The maximum number of destinations to be sampled for this model</p>
+|-
+|  class="confluenceTd" | <p>WorkTourDestinationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkTourDestinationCoefficients_SACOG-v1.8.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkTourDestinationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkTourDestinationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>OtherTourDestinationModelSampleSize</p>
+|  class="confluenceTd" | <p>25</p>
+|  class="confluenceTd" | <p>The maximum number of destinations to be sampled for this model</p>
+|-
+|  class="confluenceTd" | <p>OtherTourDestinationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\OtherTourDestinationCoefficients_SACOG-v1.8.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunOtherTourDestinationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceOtherTourDestinationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkBasedSubtourGenerationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkbasedSubtourGenerationCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkBasedSubtourGenerationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkBasedSubtourGenerationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkTourModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkTourModeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkTourModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkTourModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>SchoolTourModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\SchoolTourModeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunSchoolTourModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceSchoolTourModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkBasedSubtourModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkBasedSubtourModeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkBasedSubtourModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkBasedSubtourModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>EscortTourModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\EscortTourModeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunEscortTourModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceEscortTourModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>OtherHomeBasedTourModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\OtherHomeBasedTourModeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunOtherHomeBasedTourModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceOtherHomeBasedTourModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkTourTimeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkTourTimeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkTourTimeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkTourTimeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>SchoolTourTimeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\SchoolTourTimeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunSchoolTourTimeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceSchoolTourTimeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>OtherHomeBasedTourTimeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\OtherHomeBasedTourTimeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunOtherHomeBasedTourTimeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceOtherHomeBasedTourTimeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>WorkBasedSubtourTimeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\WorkbasedSubtourTimeCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunWorkBasedSubtourTimeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceWorkBasedSubtourTimeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IntermediateStopGenerationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\IntermediateStopGenerationCoefficients_SACOG-v1.5.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunIntermediateStopGenerationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceIntermediateStopGenerationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>IntermediateStopLocationModelSampleSize</p>
+|  class="confluenceTd" | <p>50</p>
+|  class="confluenceTd" | <p>The maximum number of destinations to be sampled for this model</p>
+|-
+|  class="confluenceTd" | <p>IntermediateStopLocationModelCoefficients</p>
+|  class="confluenceTd" | <p>.\IntermediateStopLocationCoefficients_SACOG-v1.8.F12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunIntermediateStopLocationModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceIntermediateStopLocationModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>TripModeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\TripModeCoefficients_SACOG-v1.5.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTripModeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceTripModeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>TripTimeModelCoefficients</p>
+|  class="confluenceTd" | <p>.\TripTimeCoefficients_SACOG-v1.5.f12</p>
+|  class="confluenceTd" | <p>The full path name for the coefficient file for this model</p>
+|-
+|  class="confluenceTd" | <p>ShouldRunTripTimeModel</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>A toggle switch to run this model (can be used for partial runs, TRUE can be overridden by more general switches above)</p>
+|-
+|  class="confluenceTd" | <p>ShouldTraceTripTimeModel</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to trace the calculations for this model (if ShouldRunTrace is also TRUE)</p>
+|-
+|  class="confluenceTd" | <p>UseShortDistanceCircuityMeasures</p>
+|  class="confluenceTd" | <p>FALSE</p>
+|  class="confluenceTd" | <p>TRUE to read in and use parcel-specific circuity factors in the short distance blending calculations</p>
+|-
+|  class="confluenceTd" | <p>HouseholdSamplingRateOneInX</p>
+|  class="confluenceTd" | <p>1</p>
+|  class="confluenceTd" | <p>The denominator of the fraction of households in the input sample to be simulated (e.g. 100 is for 1 / 100)</p>
+|-
+|  class="confluenceTd" | <p>HouseholdSamplingStartWithY</p>
+|  class="confluenceTd" | <p>1</p>
+|  class="confluenceTd" | <p>The household number to simulate first (e.g. 2, in combination with 100 above would simulate HH 2, 102, 202, etc.)</p>
+|-
+|  class="confluenceTd" | <p>ShouldUseShadowPricing</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>TRUE to apply shadow pricing for the WorkLocation and SchoolLocation models</p>
+|-
+|  class="confluenceTd" | <p>UsualWorkMicrozoneThreshold</p>
+|  class="confluenceTd" | <p>5</p>
+|  class="confluenceTd" | <p>Parcel-specific threshold used in the shadow price calculations</p>
+|-
+|  class="confluenceTd" | <p>UsualSchoolMicrozoneThreshold</p>
+|  class="confluenceTd" | <p>5</p>
+|  class="confluenceTd" | <p>Parcel-specific threshold used in the shadow price calculations</p>
+|-
+|  class="confluenceTd" | <p>UsualUniversityMicrozoneThreshold</p>
+|  class="confluenceTd" | <p>5</p>
+|  class="confluenceTd" | <p>Parcel-specific threshold used in the shadow price calculations</p>
+|-
+|  class="confluenceTd" | <p>NumberOfMicrozonesInReportDiffs</p>
+|  class="confluenceTd" | <p>10</p>
+|  class="confluenceTd" | <p>Control for printing out reporting on shadow price calculations</p>
+|-
+|  class="confluenceTd" | <p>UsualWorkPercentTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Percentage tolerance to trigger work parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>UsualWorkAbsoluteTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Absolute tolerance to trigger work parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>UsualSchoolPercentTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Percentage tolerance to trigger school parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>UsualSchoolAbsoluteTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Absolute tolerance to trigger school parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>UsualUniversityPercentTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Percentage tolerance to trigger university parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>UsualUniversityAbsoluteTolerance</p>
+|  class="confluenceTd" | <p>0</p>
+|  class="confluenceTd" | <p>Absolute tolerance to trigger university parcel shadow price adjustment</p>
+|-
+|  class="confluenceTd" | <p>ShadowPriceDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the shadow price files (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>NBatches</p>
+|  class="confluenceTd" | <p>16</p>
+|  class="confluenceTd" |
+|-
+|  class="confluenceTd" | <p>NProcessors</p>
+|  class="confluenceTd" | <p>4</p>
+|  class="confluenceTd" | <p>Number of processors to be used</p>
+|-
+|  class="confluenceTd" | <p>ShouldUseParkAndRideShadowPricing</p>
+|  class="confluenceTd" | <p>TRUE</p>
+|  class="confluenceTd" | <p>If, True park and ride shadow pricing would be used in the model</p>
+|-
+|  class="confluenceTd" | <p>ParkAndRideShadowPriceDelimiter</p>
+|  class="confluenceTd" | <p>9</p>
+|  class="confluenceTd" | <p>The delimiter for the park and ride shadow pricing file (9=TAB, 32=space, 44=comma)</p>
+|-
+|  class="confluenceTd" | <p>ParkAndRideShadowPriceMaximumPenalty</p>
+|  class="confluenceTd" | <p>-20</p>
+|  class="confluenceTd" |
+|-
+|  class="confluenceTd" | <p>ParkAndRideShadowPriceTimeSpread</p>
+|  class="confluenceTd" | <p>5</p>
+|  class="confluenceTd" |
+|}</div><h4 id="id-4.3DAYSIM-SeedShadowPrice"><em>Seed Shadow Price</em></h4><p class="BodyParagraph">The see shadow price file is created by running the long-term models (work and school location choice) in DaySim ten times while continuously updating the shadow prices during each iteration. It needs to be only run once per scenario by checking “Update Shadow Price” checkbox. This runs the “ShadowPrice” application within “DaySim” application. Each time DaySim long term models are run, a shadow price file “shadow_prices.txt” is created in the working directory \Master\{SCENARIO_DIR}\Output\DaySim\working. At the end of ten iterations, the shadow price file is copied from the working directory to \Master\{SCENARIO_DIR}\Input\DaySimInput\09_SeedShadow\shadow_prices.txt. At beginning of each run this file is copied back to the working directory so that DaySim could use it while simulating work and school parcel location choices.</p><h3 id="id-4.3DAYSIM-DaySimOutputs"><span style="color: rgb(255,102,0);">DaySim Outputs</span></h3><p class="BodyParagraph">The person, tour and trip level output files contain all of the variables predicted by DaySim, plus ID variables to cross-reference each other and the input data files in order to append more information if necessary. These output files are under the scenario directory \Master\{SCENARIO_DIR}\Output\DaySim.</p><h4 id="id-4.3DAYSIM-HouseholdandHouseholdDayFiles"><em>Household and Household Day Files</em></h4><p class="BodyParagraph">The DaySim household and household day output files append the model predicted information into the household input files. Household output file is \Master\{SCENARIO_DIR}\Output\DaySim\_household.tsv, in the exact same format as the input file in Table 4‑18.</p><p class="BodyParagraph">The household day output file is at \Master\{SCENARIO_DIR}\Output\DaySim \household_day.tsv.</p><h4 id="id-4.3DAYSIM-TABLE4-25HOUSEHOLDDAYFILE">TABLE 4-25 HOUSEHOLD DAY FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>Household id</p>
+|-
+|  class="confluenceTd" | <p>DAY</p>
+|  class="confluenceTd" | <p>Diary / simulation day ID</p>
+|-
+|  class="confluenceTd" | <p>DOW</p>
+|  class="confluenceTd" | <p>Day of week</p>
+|-
+|  class="confluenceTd" | <p>JTTOURS</p>
+|  class="confluenceTd" | <p>HH fully joint tours in day</p>
+|-
+|  class="confluenceTd" | <p>PHTOURS</p>
+|  class="confluenceTd" | <p>HH partially joint half tours</p>
+|-
+|  class="confluenceTd" | <p>FHTOURS</p>
+|  class="confluenceTd" | <p>HH fully joint half tours</p>
+|-
+|  class="confluenceTd" | <p>HDEXPFAC</p>
+|  class="confluenceTd" | <p>HH day expansion factor</p>
+|}</div><h4 id="id-4.3DAYSIM-PersonandPersonDayFiles"><em>Person and Person Day Files</em></h4><p class="BodyParagraph">The person output file is \Master\{SCENARIO_DIR}\Output\DaySim\_person.tsv; in the exact same format as the input file in Table 4‑19.</p><p class="BodyParagraph">The person-day output file has the person-day-level variables from a previous run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_person_day.tsv.</p><h4 id="id-4.3DAYSIM-TABLE4-26PERSONDAYFILEFORMAT">TABLE 4-26 PERSON DAY FILE FORMAT</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>PERSON_ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>HOUSEHOLD_DAY_ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>Household id</p>
+|-
+|  class="confluenceTd" | <p>PNO</p>
+|  class="confluenceTd" | <p>person sequential number on file</p>
+|-
+|  class="confluenceTd" | <p>DAY</p>
+|  class="confluenceTd" | <p>Diary / simulation day ID</p>
+|-
+|  class="confluenceTd" | <p>BEGHOM</p>
+|  class="confluenceTd" | <p>Dairy day begins at home?</p>
+|-
+|  class="confluenceTd" | <p>ENDHOM</p>
+|  class="confluenceTd" | <p>Dairy day ends at home?</p>
+|-
+|  class="confluenceTd" | <p>HBTOURS</p>
+|  class="confluenceTd" | <p>home based tours in day</p>
+|-
+|  class="confluenceTd" | <p>WBTOURS</p>
+|  class="confluenceTd" | <p>work based tours in day</p>
+|-
+|  class="confluenceTd" | <p>UWTOURS</p>
+|  class="confluenceTd" | <p>tours to usual workplace in day</p>
+|-
+|  class="confluenceTd" | <p>WKTOURS</p>
+|  class="confluenceTd" | <p>work tours</p>
+|-
+|  class="confluenceTd" | <p>SCTOURS</p>
+|  class="confluenceTd" | <p>school tours</p>
+|-
+|  class="confluenceTd" | <p>ESTOURS</p>
+|  class="confluenceTd" | <p>escort tours</p>
+|-
+|  class="confluenceTd" | <p>PBTOURS</p>
+|  class="confluenceTd" | <p>personal business Tours</p>
+|-
+|  class="confluenceTd" | <p>SHTOURS</p>
+|  class="confluenceTd" | <p>shopping tours</p>
+|-
+|  class="confluenceTd" | <p>MLTOURS</p>
+|  class="confluenceTd" | <p>meal tours</p>
+|-
+|  class="confluenceTd" | <p>SOTOURS</p>
+|  class="confluenceTd" | <p>social tours</p>
+|-
+|  class="confluenceTd" | <p>RETOURS</p>
+|  class="confluenceTd" | <p>recreation tours</p>
+|-
+|  class="confluenceTd" | <p>METOURS</p>
+|  class="confluenceTd" | <p>medical tours</p>
+|-
+|  class="confluenceTd" | <p>WKSTOPS</p>
+|  class="confluenceTd" | <p>work stops in day</p>
+|-
+|  class="confluenceTd" | <p>SCSTOPS</p>
+|  class="confluenceTd" | <p>school stops in day</p>
+|-
+|  class="confluenceTd" | <p>ESSTOPS</p>
+|  class="confluenceTd" | <p>escort stops in day</p>
+|-
+|  class="confluenceTd" | <p>PBSTOPS</p>
+|  class="confluenceTd" | <p>personal bus stops in day</p>
+|-
+|  class="confluenceTd" | <p>SHSTOPS</p>
+|  class="confluenceTd" | <p>shopping stops in day</p>
+|-
+|  class="confluenceTd" | <p>MLSTOPS</p>
+|  class="confluenceTd" | <p>meal stops  in day</p>
+|-
+|  class="confluenceTd" | <p>SOSTOPS</p>
+|  class="confluenceTd" | <p>social stops  in day</p>
+|-
+|  class="confluenceTd" | <p>RESTOPS</p>
+|  class="confluenceTd" | <p>recreation stops  in day</p>
+|-
+|  class="confluenceTd" | <p>MESTOPS</p>
+|  class="confluenceTd" | <p>medical stops  in day</p>
+|-
+|  class="confluenceTd" | <p>WKATHOME</p>
+|  class="confluenceTd" | <p>Minutes worked at home in day</p>
+|-
+|  class="confluenceTd" | <p>PDEXPFAC</p>
+|  class="confluenceTd" | <p>Person-day expansion factor</p>
+|}</div><h4 id="id-4.3DAYSIM-TourFile"><em>Tour File</em></h4><p>This file has tour-level variables based by all persons predicted by a previous DaySim run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_tour.tsv. The following table summarizes the contents of this file.</p><h4 id="id-4.3DAYSIM-TABLE4-27TOURFILE">TABLE 4-27 TOUR FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>PERSON_ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>PERSON_DAY_ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>Household ID</p>
+|-
+|  class="confluenceTd" | <p>PNO</p>
+|  class="confluenceTd" | <p>person sequential number on file</p>
+|-
+|  class="confluenceTd" | <p>DAY</p>
+|  class="confluenceTd" | <p>Diary / simulation day ID</p>
+|-
+|  class="confluenceTd" | <p>TOUR</p>
+|  class="confluenceTd" | <p>tour ID</p>
+|-
+|  class="confluenceTd" | <p>JTINDEX</p>
+|  class="confluenceTd" | <p>household joint tour index</p>
+|-
+|  class="confluenceTd" | <p>PARENT</p>
+|  class="confluenceTd" | <p>parent tour ID</p>
+|-
+|  class="confluenceTd" | <p>SUBTRS</p>
+|  class="confluenceTd" | <p>number of sub-tours</p>
+|-
+|  class="confluenceTd" | <p>PDPURP</p>
+|  class="confluenceTd" | <p>primary destination purpose</p>
+|-
+|  class="confluenceTd" | <p>TLVORIG</p>
+|  class="confluenceTd" | <p>time leave tour origin</p>
+|-
+|  class="confluenceTd" | <p>TARDEST</p>
+|  class="confluenceTd" | <p>time arrive tour destination</p>
+|-
+|  class="confluenceTd" | <p>TLVDEST</p>
+|  class="confluenceTd" | <p>time leave tour destination</p>
+|-
+|  class="confluenceTd" | <p>TARORIG</p>
+|  class="confluenceTd" | <p>time arrive tour origin</p>
+|-
+|  class="confluenceTd" | <p>TOADTYP</p>
+|  class="confluenceTd" | <p>tour origin address type</p>
+|-
+|  class="confluenceTd" | <p>TDADTYP</p>
+|  class="confluenceTd" | <p>tour destination address type</p>
+|-
+|  class="confluenceTd" | <p>TOPCL</p>
+|  class="confluenceTd" | <p>tour origin parcel</p>
+|-
+|  class="confluenceTd" | <p>TOTAZ</p>
+|  class="confluenceTd" | <p>tour origin TAZ</p>
+|-
+|  class="confluenceTd" | <p>TDPCL</p>
+|  class="confluenceTd" | <p>tour destination parcel</p>
+|-
+|  class="confluenceTd" | <p>TDTAZ</p>
+|  class="confluenceTd" | <p>tour destination TAZ</p>
+|-
+|  class="confluenceTd" | <p>TMODETP</p>
+|  class="confluenceTd" | <p>tour main mode type</p>
+|-
+|  class="confluenceTd" | <p>TPATHTP</p>
+|  class="confluenceTd" | <p>tour main mode path type</p>
+|-
+|  class="confluenceTd" | <p>TAUTOTIME</p>
+|  class="confluenceTd" | <p>tour 1-way auto time</p>
+|-
+|  class="confluenceTd" | <p>TAUTOCOST</p>
+|  class="confluenceTd" | <p>tour 1-way auto distance</p>
+|-
+|  class="confluenceTd" | <p>TAUTODIST</p>
+|  class="confluenceTd" | <p>tour 1-way auto cost</p>
+|-
+|  class="confluenceTd" | <p>TRIPSH1</p>
+|  class="confluenceTd" | <p>1st half tour number of trips</p>
+|-
+|  class="confluenceTd" | <p>TRIPSH2</p>
+|  class="confluenceTd" | <p>2nd half tour number of trips</p>
+|-
+|  class="confluenceTd" | <p>PHTINDX1</p>
+|  class="confluenceTd" | <p>1st half-partial joint half tour index</p>
+|-
+|  class="confluenceTd" | <p>PHTINDX2</p>
+|  class="confluenceTd" | <p>2nd half-partial joint half tour index</p>
+|-
+|  class="confluenceTd" | <p>FHTINDX1</p>
+|  class="confluenceTd" | <p>1s half- fully joint half tour index</p>
+|-
+|  class="confluenceTd" | <p>FHTINDX2</p>
+|  class="confluenceTd" | <p>2nd half- fully joint half tour index</p>
+|-
+|  class="confluenceTd" | <p>TOEXPFAC</p>
+|  class="confluenceTd" | <p>trip expansion factor</p>
+|}</div><h4 id="id-4.3DAYSIM-TripFile"><em>Trip File</em></h4><p>This file has trip-level variables for all trips predicted from a previous DaySim run. It is \Master\{SCENARIO_DIR}\Output\DaySim\_trip.tsv.</p><h4 id="id-4.3DAYSIM-TABLE4-28DAYSIMOUTPUTTRIPFILE">TABLE 4-28 DAYSIM OUTPUT TRIP FILE</h4><div class="table-wrap">
+{|  class="wikitable"
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>FIELD</strong></p>
+|  class="highlight-red confluenceTd" data-highlight-colour="red" | <p><strong>DESCRIPTION</strong></p>
+|-
+|  class="confluenceTd" | <p>ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>TOUR_ID</p>
+|  class="confluenceTd" | <p>internal DaySim record ID</p>
+|-
+|  class="confluenceTd" | <p>HHNO</p>
+|  class="confluenceTd" | <p>household ID</p>
+|-
+|  class="confluenceTd" | <p>PNO</p>
+|  class="confluenceTd" | <p>person sequence number on file</p>
+|-
+|  class="confluenceTd" | <p>DAY</p>
+|  class="confluenceTd" | <p>diary / simulation day ID</p>
+|-
+|  class="confluenceTd" | <p>TOUR</p>
+|  class="confluenceTd" | <p>tour ID</p>
+|-
+|  class="confluenceTd" | <p>HALF</p>
+|  class="confluenceTd" | <p>tour half</p>
+|-
+|  class="confluenceTd" | <p>TSEG</p>
+|  class="confluenceTd" | <p>trip segment number within half tour</p>
+|-
+|  class="confluenceTd" | <p>TSVID</p>
+|  class="confluenceTd" | <p>original survey trip ID number</p>
+|-
+|  class="confluenceTd" | <p>OPURP</p>
+|  class="confluenceTd" | <p>trip origin purpose</p>
+|-
+|  class="confluenceTd" | <p>DPURP</p>
+|  class="confluenceTd" | <p>trip destination purpose</p>
+|-
+|  class="confluenceTd" | <p>OADTYP</p>
+|  class="confluenceTd" | <p>trip origin address type</p>
+|-
+|  class="confluenceTd" | <p>DADTYP</p>
+|  class="confluenceTd" | <p>trip destination address type</p>
+|-
+|  class="confluenceTd" | <p>OPCL</p>
+|  class="confluenceTd" | <p>trip origin parcel</p>
+|-
+|  class="confluenceTd" | <p>OTAZ</p>
+|  class="confluenceTd" | <p>trip origin zone</p>
+|-
+|  class="confluenceTd" | <p>DPCL</p>
+|  class="confluenceTd" | <p>trip destination parcel</p>
+|-
+|  class="confluenceTd" | <p>DTAZ</p>
+|  class="confluenceTd" | <p>trip destination zone</p>
+|-
+|  class="confluenceTd" | <p>MODE</p>
+|  class="confluenceTd" | <p>trip mode</p>
+|-
+|  class="confluenceTd" | <p>PATHTYPE</p>
+|  class="confluenceTd" | <p>transit sub-mode</p>
+|-
+|  class="confluenceTd" | <p>DORP</p>
+|  class="confluenceTd" | <p>trip driver or passenger</p>
+|-
+|  class="confluenceTd" | <p>DEPTM</p>
+|  class="confluenceTd" | <p>trip departure time (min after 3 am)</p>
+|-
+|  class="confluenceTd" | <p>ARRTM</p>
+|  class="confluenceTd" | <p>trip arrival time (min after 3 am)</p>
+|-
+|  class="confluenceTd" | <p>ENDACTTM</p>
+|  class="confluenceTd" | <p>trip destination activity end time</p>
+|-
+|  class="confluenceTd" | <p>TRAVTIME</p>
+|  class="confluenceTd" | <p>network travel time, min (by SOV)</p>
+|-
+|  class="confluenceTd" | <p>TRAVCOST</p>
+|  class="confluenceTd" | <p>network travel time, min (by SOV)</p>
+|-
+|  class="confluenceTd" | <p>TRAVDIST</p>
+|  class="confluenceTd" | <p>network travel distance, miles (by SOV)</p>
+|-
+|  class="confluenceTd" | <p>VOT</p>
+|  class="confluenceTd" | <p>trip value of time (cents/minute)</p>
+|-
+|  class="confluenceTd" | <p>TREXPFAC</p>
+|  class="confluenceTd" | <p>trip expansion factor</p>
+|}</div>